Kramer Electronics PIP-200xl, PIP-300 user manual Before Installing on a Rack

Page 11

Installing on a Rack

5 Installing on a Rack

This section describes what to do before installing on a rack and how to rack mount.

Before Installing on a Rack

Before installing on a rack, be sure that the environment is within the recommended range:

Operating temperature range +5 to +45 Deg. Centigrade

Operating humidity range

5 to 65% RHL, non-condensing

Storage temperature range

-20 to +70 Deg. Centigrade

Storage humidity range

5 to 95% RHL, non-condensing

￿ CAUTION!!

When installing on a 19" rack, avoid hazards by taking care that:

1It is located within the recommended environmental conditions, as the operating ambient temperature of a closed or multi unit rack assembly may exceed the room ambient temperature.

2Once rack mounted, enough air will still flow around the machine.

3The machine is placed straight in the correct horizontal position.

4You do not overload the circuit(s). When connecting the machine to the supply circuit, overloading the circuits might have a detrimental effect on overcurrent protection and supply wiring. Refer to the appropriate nameplate ratings for information. For example, for fuse replacement, see the value printed on the product label.

5The machine is earthed (grounded) in a reliable way and is connected only to an electricity socket with grounding. Pay particular attention to supply connections other than direct connections to the branch circuit (for example, the use of power strips), and that you use only the power cord that is supplied with the machine.

How to Rack Mount

To rack-mount a machine:

1Attach both ear brackets to the machine. To do so, remove the screws from each side of the machine (3 on each side), and replace those screws through the ear brackets.

2Place the ears of the machine against the rack rails, and insert the proper screws (not provided) through each of the four holes in the rack ears.

Note that:

￿In some models, the front panel may feature built-in rack ears

￿Detachable rack ears can be removed for desktop use

￿Always mount the machine in the rack before you attach any cables or connect the machine to the power

￿If you are using a Kramer rack adapter kit (for a machine that is not 19"), see the Rack Adapters user manual for installation instructions (you can download it at: http://www.kramerelectronics.com)

8

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Models Figures ContentsTables Quick Start IntroductionGetting Started Menu Items Overview PIP-300 and PIP-200xl featureDefine the Picture in Picture Inserter machines Your Picture in Picture Inserter MachinesPIP-200xl Picture in Picture Inserter PIP-300 Picture in Picture Inserter Feature Function Front Panel Picture in Picture Inserter FeaturesRear Panel Picture in Picture Inserter Features Before Installing on a Rack Installing on a RackConnecting the PIP-300 Picture in Picture Inserter Connecting the PIP-300 Picture in Picture Inserter Connecting a PC without using a Null-modem Adapter Connecting a PCMenu Item Function Configuring and Operating your PIP-300Using the Menu PIP-300 Main Menu ItemsPIP-300 Menu Guide Mode Function Mode Submenu FeaturesPIP Sizing and Positioning Features Recommended PIP sizes Video Settings Submenu FeaturesPresets Submenu Features Labeling Submenu Size and position channels 1 and 3 as desired Displaying the Layers in the PIP ModePress Input button 1, or Upgrading Firmware Firmware UpgradeConnecting the PC to the RS-232 Port Downloading from the InternetAction area, select Erase then Program PIP-200xl PIP-300 Technical SpecificationsProtocol Definitions Communication Protocol1# Hex Description Instruction Codes for the Communication ProtocolDetails of Instruction SET Instruction 0x11 Contrast Instruction 0x21 to Instruction 0x29 Labeling Only the first purchase customer may enforce this warranty 2900-000081 REV
Top Page Image Contents