Kramer Electronics PIP-300, PIP-200xl user manual Action area, select Erase then Program

Page 22

Firmware Upgrade

Figure 7: Goal Screen

2.Click the Open… button to select the new firmware hex file1.

3.Click the Options… button, select the Inverted2 check box in the Reset Polarity area and Click OK.

4.In the Action area, select Erase then Program.

5.Click the START button.

The software erases and then programs flash memory.

Upon Completion of the operation, the System Status Window displays: “Erase and program completed successfully” (see Figure 8).

Figure 8: System Status Screen

6.Exit the programmer software.

7.Disconnect the power on the PIP-300.

8.Release the PROG. (IN) button.

9.Connect the power on the PIP-300.

1 Located in the C:\Program Files\KramerFlash folder

2 In some models you need to select the Normal check box

19

Image 22

Contents Models Contents FiguresTables Getting Started IntroductionQuick Start Menu Items PIP-300 and PIP-200xl feature OverviewYour Picture in Picture Inserter Machines Define the Picture in Picture Inserter machinesPIP-200xl Picture in Picture Inserter PIP-300 Picture in Picture Inserter Rear Panel Picture in Picture Inserter Features Front Panel Picture in Picture Inserter FeaturesFeature Function Installing on a Rack Before Installing on a RackConnecting the PIP-300 Picture in Picture Inserter Connecting the PIP-300 Picture in Picture Inserter Connecting a PC Connecting a PC without using a Null-modem AdapterPIP-300 Main Menu Items Configuring and Operating your PIP-300Using the Menu Menu Item FunctionPIP-300 Menu Guide PIP Sizing and Positioning Features Mode Submenu FeaturesMode Function Presets Submenu Features Video Settings Submenu FeaturesRecommended PIP sizes Labeling Submenu Press Input button 1, or Displaying the Layers in the PIP ModeSize and position channels 1 and 3 as desired Downloading from the Internet Firmware UpgradeConnecting the PC to the RS-232 Port Upgrading FirmwareAction area, select Erase then Program Technical Specifications PIP-200xl PIP-300Communication Protocol1 Protocol DefinitionsInstruction Codes for the Communication Protocol # Hex DescriptionDetails of Instruction SET Instruction 0x11 Contrast Instruction 0x21 to Instruction 0x29 Labeling Only the first purchase customer may enforce this warranty 2900-000081 REV