Kramer Electronics PIP-200xl, PIP-300 user manual Labeling Submenu

Page 19

Configuring and Operating your PIP-300

7.1.4The Labeling Submenu

The labeling submenu lets you display labels over the input pictures, remove them from the display or edit them. To turn labels on or off select the LABEL ON or LABEL OFF items in the LABELING menu respectively.

The input pictures are labeled1 Channel 1 to Channel 3 by default2. You can edit the text labels for each channel by using the labeling submenu:

￿￿Press ENTER on the LABELING submenu and choose the EDIT LABEL command. The selected channel name appears with its first letter blinking

￿￿Use the ￿ and ￿ buttons to select the first desired letter3

￿￿Use the ￿ button to continue to the next letter

￿￿Use the ￿ button to return to the previous letter

￿￿Use the ENTER button to accept changes

For example, to change the labeling from CHANNEL 2 to SAT 3, do the following:

1.Press the INPUT 2 button, and then press the ENTER button.

2.Select LABELING from the menu and choose the EDIT LABEL menu item.

The CHANNEL 2 label appears, and the first character is blinking.

3.Press the ￿ button 16 times to change the letter C to S, and then press the

￿button to continue to the second letter (H).

4.Press the ￿ button 7 times to change the letter H to A, and then press the ￿ button to continue to the third letter.

5.Press the ￿ button 19 times to change the letter A to T, and then press the

￿button to continue to the next letter.

6.Press the ￿ button 14 times to change the letter N to a blank space, and then press the ￿ button to continue to the next letter.

7.Press the ￿ button 15 times to change the letter N to 3, and then press the

￿button to continue to the next letter.

8.Press the ￿ or ￿ buttons to change the remaining characters to blank spaces.

9.Press ENTER to accept changes.

1 In some versions, the labeling does not appear on the 1:1 sized image (in the PIP mode) or when the PIPs overlap 2 For PIP-200xl, Channel 1 and Channel 2

3 Characters cycle between a and z, and between 1 and 0 and space

16

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Models Figures ContentsTables Getting Started IntroductionQuick Start Menu Items Overview PIP-300 and PIP-200xl featureDefine the Picture in Picture Inserter machines Your Picture in Picture Inserter MachinesPIP-200xl Picture in Picture Inserter PIP-300 Picture in Picture Inserter Rear Panel Picture in Picture Inserter Features Front Panel Picture in Picture Inserter FeaturesFeature Function Before Installing on a Rack Installing on a RackConnecting the PIP-300 Picture in Picture Inserter Connecting the PIP-300 Picture in Picture Inserter Connecting a PC without using a Null-modem Adapter Connecting a PCMenu Item Function Configuring and Operating your PIP-300Using the Menu PIP-300 Main Menu ItemsPIP-300 Menu Guide PIP Sizing and Positioning Features Mode Submenu FeaturesMode Function Presets Submenu Features Video Settings Submenu FeaturesRecommended PIP sizes Labeling Submenu Press Input button 1, or Displaying the Layers in the PIP ModeSize and position channels 1 and 3 as desired Upgrading Firmware Firmware UpgradeConnecting the PC to the RS-232 Port Downloading from the InternetAction area, select Erase then Program PIP-200xl PIP-300 Technical SpecificationsProtocol Definitions Communication Protocol1# Hex Description Instruction Codes for the Communication ProtocolDetails of Instruction SET Instruction 0x11 Contrast Instruction 0x21 to Instruction 0x29 Labeling Only the first purchase customer may enforce this warranty 2900-000081 REV
Top Page Image Contents