Kyocera TASKalfa3550ci Deleting a Prologue/Epilogue File, Assigning a Prologue/Epilogue File

Advanced

1

2

3

In Advanced > Prologue/Epilogue, select a Prologue/Epilogue file name from the list, and then click Edit.

After your text editor opens, make your changes to the file.

Save the file and exit.

Note: Editing and saving a command file replaces the contents of the existing local or network file.

Deleting a Prologue/Epilogue File

1

2

You can remove a Prologue/Epilogue file from the list.

In Advanced > Prologue/Epilogue, select a Prologue/Epilogue file name from the list, and then click Delete.

In the delete confirmation box, click Yes to accept.

Note: Only the file name is removed from the command file list. The file itself is not deleted, but remains on the network or local computer.

Assigning a Prologue/Epilogue File

1

2

You can insert a Prologue/Epilogue file into a print job.

In Advanced > Prologue/Epilogue, select a Prologue/Epilogue file name from the list.

Under Insertion Point, select a place to insert the Prologue/Epilogue file.

Unassigning a Prologue/Epilogue File

1

2

If you designate a Prologue/Epilogue file as unassigned, you are removing it from the print job. It remains in the list. Unassigned selections are useful when the list contains several Prologue/Epilogue files, and you want to use some but not others.

In Advanced > Prologue/Epilogue, select a Prologue/Epilogue file name from the list.

Under Insertion Point, select Unassigned.

Specifying the Insertion Point

The insertion point is the location in the print job where the selected Prologue/Epilogue command file is processed by the printing system. Each file in the list can be assigned only one insertion point.

Note: The Start of the page and End of the page insertion point options are available only if PCL 5c is selected in the PDL Settings dialog box.

With a command file selected in the list, choose one insertion point option:

KX DRIVER 10-2