Cannon 300II manual Turning the Power ON/OFF, Turning the power on, Turning the power off

Page 25

■ TURNING THE POWER ON/OFF ■

TURNING THE POWER ON/OFF

Follow the procedures described below when turning the power on and off.

Turning the power on

Follow the procedure below to turn the unit on.

1.On the front of the main unit, locate the power switch on the lower left corner then press the I side of the switch to turn the power on.

2.Turn on the power switch of the computer and printer.

• Switch on the scanner before you switch on the com- puter.

•The USB port on this scanner uses a SCSI-USB converter to convert the SCSI port to a USB port. Even when connecting via a USB port, switch on the scanner before you switch on the computer.

Turning the power off

Follow the procedure below to turn the unit off.

1.Turn the computer off.

2.To turn the unit off, press the side of the power switch.

• Switch off the computer first before switching off the scanner.

•The USB port on this scanner uses a SCSI-USB converter to convert the SCSI port to a USB port. Do not switch off the scanner while the computer is on. Do not plug in or unplug the USB cable when the computer is on.

•If the scanner will not be used for a lengthy period, unplug the power cord as a safety measure.

23

MS 300_english.p65

23

07.5.14, 10:14

Image 25

Contents English Radio Interference Regulations For 120V models FCC Regulations For 120V modelsRèglement SUR LE Brouillage Radioélectrique For 120V models CopyrightIntroduction Heat Caution ConventionsContents Specifications Index Before YOU Begin Work Safety Choosing a safe locationMS 300english.p65 Power supply Daily handling Heat Cautions Features of the Microfilm Scanner DMP mode Scanner modeReader-printer mode About operation modesUnpacking Whats in the box? Options Operation panel Important parts and their functionsNegative/Positive key Operation panelFiche Carrier 190RII Preparing the carrierAutocarrier 100C AC100C FS ControllerPreparing the lens Switching the lensFixed lens Zoom lensesSlide the other lens into the unit Preparing optional printer for the DMP mode When using a USB connection When using a Scsi cardHardware requirements Operating system requirementsScsi card Connecting via ScsiScsi cable Connecting to a Computer Connecting via USBUSB port USB cableTurning the power on Turning the Power ON/OFFTurning the power off Case of Windows 98/Me Scanner recognitionCase of Windows 2000/XP Canon MS300 Scsi Scanner Device Turning the Power ON/OFF About the Software Installing the ISIS/TWAIN driverInstalling CapturePerfect Using CapturePerfect Using the software Using the ISIS/TWAIN DriverStarting CapturePerfect Closing CapturePerfectStarting up Reader-Printer mode About the Reader-Printer modeSetting the Reader-Printer mode Starting up the Reader-Printer modeExiting the Reader-Printer mode Uninstalling the software Setting the Scanner Automatic adjustment Brightness adjustmentManual adjustment Selecting the polarityTrimming Trimming/border removal settingsDefining an area for trimming Border removal Using the area setting cursors optionalRemoving the entire border Leaving a margin around the imageUsing the Fileprint Printing DMP modePrinting DMP mode User mode setting User ModeUser mode setting functions Power saver mode Cleaning mode Scanning resolutionSwitching the operation modes Hi-speed scanningReplacing the lamp Maintenance TroubleshootingMaintenance and Troubleshooting Cleaning the screen and main unit Routine cleaningCleaning the lens Cleaning paper Cleaning the Fixing RollersProblem Solution TroubleshootingScanner mode User call errorsDMP mode If the E000 fixer error is displayed Service Call ErrorsWhen you cannot clear a service call error Specifications Index Power ON/OFF08.6.5, 257 PM Canon Electronics INC