Cannon 300II manual User Mode, User mode setting functions Power saver mode

■ USER MODE ■

USER MODE

In the user mode, you can arbitrarily change the settings of the following features:

•Power saver mode

•Hi-speed scanning mode

•Scanning resolution

•Cleaning mode

•Switching the operation modes (DMP mode/Scanner mode)

User mode setting

1. Press the AE key about 2 seconds.

The LED of the AE key and the Print/Error display blink.

The power saving mode currently set will be displayed on the

Print/Error display.

2.Press the Brightness Adjustment key ( or ) to move the blinking LED up to the point where a mode, of which settings you want to change, is located.

Power saver mode

Hi-speed scanning mode

Scanning resolution

Cleaning mode

Switching the operation modes (DMP mode/Scanner mode)

3. Press the Print Number Setting key (+ or –) to select the set ting of each mode.

4.Press the Clear key to difine the setting.

User mode setting functions

Power saver mode

When the MS300II has not been operated for a specified length of time, the scanner switches into standby mode and stops project- ing the image on the screen to save power consumption.

: Does not switch into the power saver mode.

: Switches into the power saver mode if not operated more

than 15 minutes. (set at the factory before shipping)

: Switches into the power saver mode if not operated more than 60 minutes.

40

MS 300_english.p65 40 07.5.14, 10:14