■ BEFORE YOU BEGIN ... ■
Important parts and their functions
Before you use the unit, take a few minutes to become familiar with the names of the important parts.
Screen
Displays images and allows you to view images before you print them.
Operation panel
Provides keys that allow you to perform settings for image adjustment or film mode selection.
DIN connector
Allows you to connect a cable for the Autocarrier 100C, FS Controller I or Roll/Fiche carrier 200.
Power switch
Allows you to turn power on and off.
Light adjustment dial
Allows you to adjust the intensity of the light. Adjust to the magnification power of the inter- changeable lens.
Lens holder
Holds an interchangeable
lens.
Carrier stage
Holds an interchangeable carriers.
Lamp unit
Holds the lamp for the main source of illumination. Remove to change the halogen lamp.
14
MS 300_english.p65 | 14 | 07.5.14, 10:14 |