■ SETTING THE SCANNER ■
34
SETTING THE SCANNER
In the Scanner mode, the image projected on the scanner’s screen can be saved by the connected personal computer, or printed out through a printer connected to the PC. Actual settings and opera- tions for scanning differ depending on the application you use.
In the DMP mode, the image projected on the scanner’s screen can be printed out through a printer connected to the scanner. Here below explained are various functions that can be set on the scanner main unit.
Loading the film
Load the auto carrier with the film you want to view. For details about the auto carrier installation, see the instructions you received with the auto carrier.
Adjusting the image
Follow the procedure below to adjust the image on the screen. Read and perform this procedure correctly to attain a crisp image on the screen and a clear scanned image.
Rotating the image
To rotate the image to the desired angle, rotate the rotation fin ➀ to the left or right.
Enlarging and reducing image size
To make the image larger or smaller, rotate the zooming fin ➁ on the lens to the left or right.
Focusing the image
To focus the image on the screen, rotate the focusing fin ➂ on the lens to the left or right.
MS 300_english.p65 | 34 | 07.5.14, 10:14 |