Fujitsu C150-E146-02EN manual Button/LED Function, Name of the button Function LED, Led

Button/LED Function

Name of the button		Function
and LED
Button	Next	Displays the next screen.
	Previous	Displays the previous screen.
		Moves cursor to the left.
		Moves cursor to the right.
	Exit	• When you are entering settings on the operator panel, pressing this button
		immediately returns you to the “Scanner Ready” screen.
	Enter	Records parameter currently selected by cursor.
	Send To/	Operational only when Manual start mode is set or “Read” lamp lights;
	Start	starts the reading when video interface option is used. Some of application
		Softwares Use this button.
	Stop	• When “Check” LED lights, pressing this button releases error status (turn
		off “Check” and returns to “Scanner Ready” screen).
		Operational only during reading operation; stops the reading when video
		interface option is used.
		Also turns off “Check” lamp.
LED		Indicates that the scanner is ON.
	Read	Indicates that the scanner is reading or ready to read.
	Check	• If it lights, means that an alarm occurred. Pressing “Stop” button turns
		“Check” lamp off.
		• If it blinks at one second intervals, means that a jam or double feed has
		been detected. With jammed paper, removing the jammed paper turns off
		“Check” lamp. With a double feed, pressing “Stop” button turns off “Check”
		lamp.
		• If blinks at four seconds intervals, means that cleaning the ADF is
		necessary.

1-6