14.Select Interface | <Screen 54> |
1 Press “Next” 
or “Previous” 
and let the scanner display the Screen 54.
NOTE
The screen 54 will appear oniy when the scannen has proper interface boavds or option boards in the third party slot.
2At the Screen 54, press 
or 
to select
interface type. Press 
if you want to change the setting.
NOTICE
Normally, this setting does not have to be changed.
NOTE
When an appropriate board is installed in the third party slot of the scanner, the scanner automatically turns off the SCSI interface, activating the board in the third party slot. Screen 54 can be used to forcibly change the selected interface, the selected interface is forcibly changed.
NOTE
The SCSI interface and the board installed in the third party slot cannot be used at the same time.
NOTE
The default is Auto.
3 Press 
to return.
