Fujitsu C150-E146-02EN manual Reset of abrasion counter, Setting pick start time

Page 79

4. Reset of abrasion counter

When you reset the abrasion counter, you must set as follows:

1Press “Next” or “Previous” and let the scanner display the Screen 44.

2 At the Screen 44;

 

 

<Screen 44>

If you want to reset the abrasion counter,

select “Yes” by

or

button and press

. Go to procedure 3.

 

 

 

If you do not want to reset the abrasion

counter, select “No” and press

.

 

 

Finally press

to return.

 

 

 

3 At the Screen 44-1;

 

<Screen 44-1>

If you want to reset the abrasion counter,

select “Yes” and press

. If you do

 

 

not want to reset, select “No” and press

.Press

to return.

 

 

 

5. Setting pick start time

When you set the pick start time, you must set as follows:

1Press “Next” or “Previous” and let the scanner display the Screen 45.

2 At the Screen 45, press

to increase

<Screen 45>

the Pick start time or press

to de-

 

crease the Pick start time. Then press

to activate the setting. Finally press to return.

7-7

Image 79
Contents M4097D Image Scanner M4097D Image Scanner Page Page Iii Important Note to Users Shooting PrefaceConventions Contents Declaration of Conformity Viii Terms Index Components Checking the Components Units Units and AssembliesFunction Assemblies Arrangement Operator PanelName of the button Function LED Button/LED FunctionLED Counter Function Counter DisplayOperation status Power-onHopper empty Temporary errorAlarm Page Page Installation and Connections Precautions Inspection Fujitsu Limited Repositioning the Shipping Lock Connecting the power cable Turning the power switch offCable Connections Connecting the interface cables Mounting the Stacker Setting the Scsi ID and the Scsi Terminator Page Page Operating Instruction Turning the Power On Waking up the Scanner from the Low Power Mode Manual Feed Mode Setting ADF Loading Documents on the ADFMore than 30mm Feed direction ABD Max 8mm Documents are expelled into the stacker for removal Loading Documents on the Flatbed Loading Documents Larger than the Document Bed Reading a Page from a Thick Book Page ADF Document Specification Scanner Maximum Minimum M4097D Document SizeDocument type Paper weightPrecautions Document QualityPage ADF ADF Document Feeder CapacityAreas not to be Perforated Grounding Color Areas Double Feed Detection Condition Job Separation Sheet Scanner Specifications SCSI-2 Basic Product SpecificationSpecification Remarks MH/MR/MMRSpecification Installation SpecificationDimensions Page Consumables and Options Consumables Name Specification RemarksName Remarks OptionsIPC-4D Video Interface Option How to Install the Video Interface Option BoardPage AT1 Without IPC With IPC-4D Descreption OptionAT2 Parameter Description Parameter Description IPC-4D Option Setup Mode Activating the Setup Mode Contents of the Setup Mode ON/OFF Setting double feed detection Paper Thickness Setting double feed detection Paper Length Setting IPC pre-set mode Setting pick start time Reset of abrasion counterSetting time-out limit Page Scsi Terminator Setting Scsi ID SettingIPC Status Display Low Power Mode Setting Select Interface Display TPS Board ID Number Page A6 size Automatic start mode manual start modeA4 size A5 sizeDensity Duplex reading modeEquipment Error BitHalftone processing Error diffusionFiltering Front-side reading = Front-side scanningImage processing IPC preset modeLinedrawing mode Manual Feed mode = Manual ModeMirror image Manual start mode automatic start modePhotograph mode White level follower OFF Photo mode = photograph modePaper counter Setup modeSimplex reading mode Portrait orientationThird Party Interface TerminatorTime-out limit GL-8 IPC IndexSCSI-ID Page IN-4 IN-5 This manual uses recycled paper