Fujitsu C150-E146-02EN manual Activating the Setup Mode

Activating the Setup Mode

This section describes how to activate the setup mode.

1 Turn the power ON. Then the scanner	<Screen M1>
displays “Scanner Ready” on LCD.

2	If the scanner dose not have video		<Screen M2>
	interface option, go to the procedure 3.
	Press	then the scanner with the
	video interface option displays the
3	Screen M2.	then the scanner displays
	Press		<Screen M3>

the Screen M3.

4 Press	then the scanner displays	<Screen M4>
the Screen M4.

5Press . Now the scanner is at the Screen 41 (page 6-3) in Setup mode.

NOTE

Any time you press , you can return to “Scanner Ready” screen.

7-1