Fujitsu C150-E146-02EN manual Setting IPC pre-set mode

3. Setting IPC pre-set mode

When you set the using of IPC pre-set mode, you must set as follows:

1Press “Next” or “Previous” and let the scanner display the Screen 43.

2At the Screen 43, press or to select

the pre-Setting and press to activate the pre-setting. Then the scan- ner displays the Screen 43-1.

NOTICE

Following IPC Pre-setting can be selected.

•Sharpen

•Darken Character

•Copy Quarity

3At the Screen 43-1, select “Yes” or “No”. Note that when you select “Yes”, the IPC setting by Host computer is ignored. If you select “No”, the IPC setting will be

changed according to the host setting.

Finally press .

<Screen 43>

<Screen 43-1>

NOTE

When you select the Copy Quality, select the scanner’s settings and printer’s carefully to get the best quality.

7-6