Fujitsu C150-E141-02EN manual Button/LED Function, LCD Display

Page 16

Button/LED Function

Button name	Function


	Turns on or off the power when the main line switch is set to “I”.

MENU	Sets the scanner in setup or browse mode. It is also used to set test mode. (See Chapter 6)
	Setup mode is used for customizing the scanner. Browse mode is used for glancing conditions of the scanner.
	Test mode is used for testing the scanner offline.

ENTER	Used in setup, browse, or test mode.

CANCEL	• Clears an error if any.
	• Stops current scanning when the video interface is used.
	• Used in setup, browse, or test mode.

	• Lifts the hopper in normal mode without errors.
	• Used in setup, browse, or test mode.

	• Lowers the hopper in normal mode without errors.
	• Used in setup, browse, or test mode.

	Used in setup, browse, or test mode.

	Used in setup, browse, or test mode.

F1	Available as shortcut keys when functions are defined in setup mode.
F2
F3

LED	Function


POWER	Lights when the power is on.

DATA	Lights when the image buffer contains data.
	Lights when the image buffer contains data.

CHECK	Blinks when an equipment error occurs.
	Blinks when an equipment error occurs.

LCD Display

LCD

Function

Displays equipment status or error contents.

1-6

Image 16

Contents M4099D Image Scanner M4099D Image Scanner Page Fujitsu Computer Products AMERICA, INC Important Note to Users TIONS, Operating INSTRUCTION, Document Specification PrefaceConventions Contents Components Components Checking the Components Units and Assemblies UnitsName Function Assemblies Operator Panel ArrangementButton/LED Function LCD DisplayOperation status display Buzzer Sound condition FunctionInstallation and Connections Precautions AchtungInspection Label C An example Connecting the power cable Turning the main line switch offCable Connection Connecting the interface cable Operating Instruction Turning the Power On Displaying detailed information if an error occurred Basic Operation of the Operator PanelLifting or lowering the hopper Clearing a consumable life alarm Confirming the number of sheets processed by the scanner Value Meaning DescriptionUsing the function buttons F1, F2, and F3 Using the setup, browse, and test modes Turn off to quit Mode Select Blinking Transition of operator panel status and display OccurredDocumentspecification Document Size Scanner Maximum Minimum M4099DDocument Quality Ream weight of paperPaper types of documents Precautions Page Specifications Installation Specifications SpecificationExternal Dimensions Name Specification Service life and remarks ConsumablesOptions SETUP, BROWSE, and Test Modes Functions not available in setup mode Setup, Browse, and Test ModesFunctions not available in browse mode Button functions in setup or browse mode Activating the Setup or Browse ModeReady Mode selection Menu pressed in Ready status Contents of the Setup or Browse Mode Scsi ID Transition of screens in setup mode Setup mode menu screenSettings Paper size/orientation200 Settings A4P AT2 200 LA400 A4P AT2 400 LA Settings Setup Mode Paper Length Check Paper length checkLength Check 10 mmPaper Length Check Setup Mode Paper Length Check Ready Paper thickness checkPaper Thickness Check Check OFF Check on Paper thickness setupPaper Thickness Check Ready Paper Thickness Setup Ready Skew Check Check OFF Check on Skew checkSkew Check Ready IPC-3 mode IPC-3 ModePaper types and corresponding pattern numbers Hopper height Reading parameter validityHopper Height Sheets Set braking power according to the table below Paper separation levelPaper Separation Level Normal Medium Thin Paper Separation Level ReadyDrop-out color Drop-out Color Front Green Back GreenDrop-out Color Front Green Back Red Drop-out Color ReadySetup Mode Consumable Counter Consumable counterBuzzer Buzzer Buzzer ReadyBuzzer volume Buzzer Volume Min n n q q q q MaxBuzzer Volume Ready Buzzer Volume Min n n n q q q MaxLCD contrast Picking speed LCD Contrast ReadyPicking Speed Fast Slow Picking Speed ReadyInterface InterfaceVideo Setup Mode Tpif baud rateTpif Baud Rate 9600 19200 RS232C baud rateTpif Baud Rate Setup Mode Scsi ID Product ID Product ID M4099D M3099G Pre-pickProduct ID Pre-pick Pre-pick ReadyPick start time 01.0 S 05.0 S Pick start timePick start time Manual feed timeout Setup Mode Manual Feed Timeout 30 SPaper pick retry Paper Pick retry Step Times Paper Pick retry ReadyPaper feed retry Paper Feed retry TimesStep Times Paper Feed retry Paper Feed retryPaper Feed retry Ready Function key Setup Mode Setup mode lock Setup Mode LockOFF Activating the Test Mode Button functions in test modeTest Mode Offline Feed Test Please waitMode selection power on with Menu pressed Contents of the Test Mode Test Mode Offline Feed Test A4P AT2 200 LA Offline feed testLTP AT2 200 LA Feeding 123456781234Offline Feed Test OptionsOptions Endorser IPC-3D Device life Device LifeLamp F 12345678Automatic start mode manual start mode Browse modeA4 size Automatic separationDuplex reading mode Equipment ErrorError diffusion DitherFront-side reading = Front-side scanning Halftone processingHexadecimal Image emphasisLinedrawing mode Manual Feed mode = Manual ModeLandscape Letter sizePaper Jam Photograph mode White level follower OFF Photo mode = photograph modePicking start time Picking timeSetup mode Simplex reading modeStart command time-out Temporary ErrorTest mode TerminatorIndex LED Scsi ID Page