Fujitsu C150-E141-02EN manual Precautions, Achtung

Page 20

Precautions

WARNING

Place the machine with no portion of the scanner hangs over the desktop. Never attempt to move or relocate the machine without help. And hold the horizontal plane of the scanner bottom. (Not inclined plane)

ACHTUNG

Stellen Sie den Scanner sicher auf eine waagerechte, ebene Flache. Bewegen Sie den Scanner nicht ohne Hilfe.

This section describes precautions when installing the scanner.

Do not install the scanner in the following places and environments.

Place the scanner away from electrical noise sources, strong magnetic fields and air flow. If the scanner is used near an air conditioner, copying machine, or TV set, the scanner may operate incorrectly.

Keep the scanner out of the sun and away from heaters. These environments may shorten the scanner life or cause hardware failures.

Do not install the scanner in a place where vibrations may occur. This environment may cause hardware failures or may cause the scanner to operate incorrectly.

Do not install the scanner in a humid, dusty, or damp places. These environments may shorten the scanner life or cause hardware failures. Do not place the scanner where liquid spills may occur.

Be aware of the static electricity. Be sure that the flooring and the desk are made of materials that do not generate the static electricity.

See Chapter 5 SPECIFICATIONS for the information such as the size of the installation space.

2-1

Image 20
Contents M4099D Image Scanner M4099D Image Scanner Page Fujitsu Computer Products AMERICA, INC Important Note to Users TIONS, Operating INSTRUCTION, Document Specification PrefaceConventions Contents Components Components Checking the Components Units and Assemblies UnitsName Function Assemblies Operator Panel ArrangementButton/LED Function LCD Display Operation status display Buzzer Sound condition FunctionInstallation and Connections Precautions AchtungInspection Label C An example Cable Connection Turning the main line switch offConnecting the power cable Connecting the interface cable Operating Instruction Turning the Power On Displaying detailed information if an error occurred Basic Operation of the Operator PanelLifting or lowering the hopper Clearing a consumable life alarm Confirming the number of sheets processed by the scanner Value Meaning DescriptionUsing the function buttons F1, F2, and F3 Using the setup, browse, and test modes Turn off to quit Mode Select Blinking Transition of operator panel status and display OccurredDocumentspecification Document Size Scanner Maximum Minimum M4099DPaper types of documents Ream weight of paperDocument Quality Precautions Page Specifications Installation Specifications SpecificationExternal Dimensions Name Specification Service life and remarks ConsumablesOptions SETUP, BROWSE, and Test Modes Functions not available in browse mode Setup, Browse, and Test ModesFunctions not available in setup mode Ready Activating the Setup or Browse ModeButton functions in setup or browse mode Mode selection Menu pressed in Ready status Contents of the Setup or Browse Mode Scsi ID Transition of screens in setup mode Setup mode menu screenSettings Paper size/orientation400 A4P AT2 400 LA Settings A4P AT2 200 LA200 Settings Setup Mode Paper Length Check Paper length checkLength Check 10 mmPaper Length Check Setup Mode Paper Length Check Ready Paper thickness checkPaper Thickness Check Ready Paper thickness setupPaper Thickness Check Check OFF Check on Paper Thickness Setup Ready Skew Check Ready Skew checkSkew Check Check OFF Check on IPC-3 mode IPC-3 ModePaper types and corresponding pattern numbers Hopper height Reading parameter validityHopper Height Sheets Set braking power according to the table below Paper separation levelPaper Separation Level Normal Medium Thin Paper Separation Level ReadyDrop-out color Drop-out Color Front Green Back GreenDrop-out Color Front Green Back Red Drop-out Color ReadySetup Mode Consumable Counter Consumable counterBuzzer Buzzer Buzzer ReadyBuzzer volume Buzzer Volume Min n n q q q q MaxLCD contrast Buzzer Volume Min n n n q q q MaxBuzzer Volume Ready Picking speed LCD Contrast ReadyPicking Speed Fast Slow Picking Speed ReadyInterface InterfaceVideo Setup Mode Tpif baud rateTpif Baud Rate RS232C baud rateTpif Baud Rate 9600 19200 Setup Mode Scsi ID Product ID Product ID Pre-pickProduct ID M4099D M3099G Pre-pick Pre-pick ReadyPick start time Pick start timePick start time 01.0 S 05.0 S Manual feed timeout Setup Mode Manual Feed Timeout 30 SPaper pick retry Paper Pick retry Step Times Paper Pick retry ReadyPaper feed retry Paper Feed retry TimesPaper Feed retry Ready Paper Feed retryStep Times Paper Feed retry Function key Setup Mode Setup mode lock Setup Mode LockOFF Activating the Test Mode Button functions in test modeTest Mode Offline Feed Test Please waitMode selection power on with Menu pressed Contents of the Test Mode Test Mode Offline Feed Test A4P AT2 200 LA Offline feed testLTP AT2 200 LA Feeding 123456781234Options Endorser IPC-3D OptionsOffline Feed Test Device life Device LifeLamp F 12345678Automatic start mode manual start mode Browse modeA4 size Automatic separationDuplex reading mode Equipment ErrorError diffusion DitherFront-side reading = Front-side scanning Halftone processingHexadecimal Image emphasisLinedrawing mode Manual Feed mode = Manual ModeLandscape Letter sizePaper Jam Photograph mode White level follower OFF Photo mode = photograph modePicking start time Picking timeSetup mode Simplex reading modeStart command time-out Temporary ErrorTest mode TerminatorIndex LED Scsi ID Page