Pick start time
This function sets the period from when paper is manually put on the hopper to when the pick opera- tion starts.
LCD display
Options
Remarks
Pick start time
00.2 S to 29.8 S (Default: 01.0 S)
In units of 0.2 second
The following is an example of operation when you use this function.
1.In <<SETUP MODE>> initial screen, press
ENTER .
The <<SETUP MODE>> menu screen (Settings or Paper Length Check) appears.
NOTE
The “Settings” screen does not appear and the “Paper Length Check” screen first ap- pears when your scanner is not controlled through the video or TP interface.
2.Press 
repeatedly until “Pick start time” appears in the lower line of the menu screen.
3.Press ENTER .
The option select screen appears with the current setting 01.0S blinking (blinking indi- cates “changeable”).
4.Press 
or 
.
The displayed option changes (00.2S to 29.8S). The value changes in 0.2 seconds.
5.When the desired value appears, press
ENTER to save the change.
The LCD returns to the <<SETUP MODE>> menu screen (Pick start time).
<<SETUP MODE>>
<<SETUP MODE>>
Settings
<<SETUP MODE>> Paper Length Check
<<SETUP MODE>>
Pick start time
Pick start time
01.0 S
Pick start time
05.0 S
<<SETUP MODE>>
Pick start time
