Fujitsu C150-E141-02EN manual IPC-3 mode, IPC-3 Mode

IPC-3 mode

This function selects a pattern to be set in the IPC-3 image processing feature.

NOTE

You cannot use this function when the setup mode is brought by pressing MENU in the Ready status.

LCD display	Options	Remarks
IPC-3 Mode	0, 1, 2, 3, 4, 5	0:	do not select any pattern

1 to 5: select pattern numbers 1 to 5

The following is an example of operation when you use this function.

1.In <<SETUP MODE>> initial screen, press

ENTER .

The <<SETUP MODE>> menu screen (Settings or Paper Length Check) appears.

NOTE

The “Settings” screen does not appear and the “Paper Length Check” screen first ap- pears when your scanner is not controlled through the video or TP interface.

2.Press four times.

The <<SETUP MODE>> menu screen (IPC-3 Mode) appears.

3.Press ENTER .

The option select screen appears with the current setting 0 blinking (blinking indicates “changeable”).

4.Press or .

The displayed option changes (1, 2, 3, 4, 5).

<<SETUP MODE>>

<<SETUP MODE>>

Settings

<<SETUP MODE>> Paper Length Check

<<SETUP MODE>>

IPC-3 Mode

IPC-3 Mode

0

IPC-3 Mode

5

6-14