Fujitsu C150-E141-02EN manual Device life, Device Life, Lamp F, 12345678

Page 98

Device life

This function displays the accumulative number of sheets fed and the accumulative number of hours during which the lamp is lit since the scanner has been installed. These values are helpful for estimating the life of devices.

LCD display	Displayed devices	Remarks


Device Life	COUNT, LAMP F, and LAMP B	COUNT: accumulative number of sheets fed.
		LAMP F: accumulative number of operating
		hours for the front-side lamp.
		LAMP B. accumulative number of operating
		hours for the back-side lamp.

* The unit of each value is not displayed on the LCD.

The following is an example operation when you use this function.

1.In the <<TEST MODE>> initial screen, press

ENTER .

The <<TEST MODE>> menu screen (Offline

Feed Test) appears.

<<TEST MODE>>

<<TEST MODE>> Offline Feed Test

2.Press four times.

The <<TEST MODE>> menu screen (Device Life) appears.

3.Press ENTER .

The current value display screen appears. You can estimate the device life.

4.To quit the <<TEST MODE>>, turn off the power.

<<TEST MODE>>

Device Life

COUNT	LAMP F: 1234567
12345678	B: 1234567

6-53

Image 98

Contents M4099D Image Scanner M4099D Image Scanner Page Fujitsu Computer Products AMERICA, INC Important Note to Users TIONS, Operating INSTRUCTION, Document Specification PrefaceConventions Contents Components Components Checking the Components Units and Assemblies UnitsName Function Assemblies Operator Panel ArrangementButton/LED Function LCD DisplayOperation status display Buzzer Sound condition FunctionInstallation and Connections Precautions AchtungInspection Label C An example Cable Connection Turning the main line switch offConnecting the power cable Connecting the interface cable Operating Instruction Turning the Power On Displaying detailed information if an error occurred Basic Operation of the Operator PanelLifting or lowering the hopper Clearing a consumable life alarm Confirming the number of sheets processed by the scanner Value Meaning DescriptionUsing the function buttons F1, F2, and F3 Using the setup, browse, and test modes Turn off to quit Mode Select Blinking Transition of operator panel status and display OccurredDocumentspecification Document Size Scanner Maximum Minimum M4099DPaper types of documents Ream weight of paperDocument Quality Precautions Page Specifications Installation Specifications SpecificationExternal Dimensions Name Specification Service life and remarks ConsumablesOptions SETUP, BROWSE, and Test Modes Functions not available in browse mode Setup, Browse, and Test ModesFunctions not available in setup mode Ready Activating the Setup or Browse ModeButton functions in setup or browse mode Mode selection Menu pressed in Ready status Contents of the Setup or Browse Mode Scsi ID Transition of screens in setup mode Setup mode menu screenSettings Paper size/orientation400 A4P AT2 400 LA Settings A4P AT2 200 LA200 Length Check Settings Setup Mode Paper Length CheckPaper length check 10 mmPaper Length Check Setup Mode Paper Length Check Ready Paper thickness checkPaper Thickness Check Ready Paper thickness setupPaper Thickness Check Check OFF Check on Paper Thickness Setup Ready Skew Check Ready Skew checkSkew Check Check OFF Check on IPC-3 mode IPC-3 ModePaper types and corresponding pattern numbers Hopper height Reading parameter validityHopper Height Sheets Set braking power according to the table below Paper separation levelPaper Separation Level Normal Medium Thin Paper Separation Level ReadyDrop-out color Drop-out Color Front Green Back GreenDrop-out Color Front Green Back Red Drop-out Color ReadySetup Mode Consumable Counter Consumable counterBuzzer Buzzer Buzzer ReadyBuzzer volume Buzzer Volume Min n n q q q q MaxLCD contrast Buzzer Volume Min n n n q q q MaxBuzzer Volume Ready Picking speed LCD Contrast ReadyPicking Speed Fast Slow Picking Speed ReadyInterface InterfaceVideo Setup Mode Tpif baud rateTpif Baud Rate RS232C baud rateTpif Baud Rate 9600 19200 Setup Mode Scsi ID Product ID Product ID Pre-pickProduct ID M4099D M3099G Pre-pick Pre-pick ReadyPick start time Pick start timePick start time 01.0 S 05.0 S Manual feed timeout Setup Mode Manual Feed Timeout 30 SPaper pick retry Paper Pick retry Step Times Paper Pick retry ReadyPaper feed retry Paper Feed retry TimesPaper Feed retry Ready Paper Feed retryStep Times Paper Feed retry Function key Setup Mode Setup mode lock Setup Mode LockOFF Test Mode Offline Feed Test Activating the Test ModeButton functions in test mode Please waitMode selection power on with Menu pressed Contents of the Test Mode Test Mode Offline Feed Test A4P AT2 200 LA Offline feed testLTP AT2 200 LA Feeding 123456781234Options Endorser IPC-3D OptionsOffline Feed Test Lamp F Device lifeDevice Life 12345678A4 size Automatic start mode manual start modeBrowse mode Automatic separationError diffusion Duplex reading modeEquipment Error DitherHexadecimal Front-side reading = Front-side scanningHalftone processing Image emphasisLandscape Linedrawing modeManual Feed mode = Manual Mode Letter sizePicking start time Paper Jam Photograph mode White level follower OFFPhoto mode = photograph mode Picking timeStart command time-out Setup modeSimplex reading mode Temporary ErrorTest mode TerminatorIndex LED Scsi ID Page