Skew check
This function determines if abnormal skew is detected or not. You cannot change the setting if it is set by the host computer.
LCD display
Options
Remarks
Skew Check
On, Off (Default: Off)
The following is an example of operation when you use this function.
1. In <<SETUP MODE>> initial screen, press ENTER . | <<SETUP MODE>> |
The <<SETUP MODE>> menu screen | |
(Settings or Paper Length Check) appears. |
|
NOTE
The “Settings” screen does not appear and the “Paper Length Check” screen first ap- pears when your scanner is not controlled through the video or TP interface.
2.Press 
three times.
The <<SETUP MODE>> menu screen (Skew Check) appears.
3.Press ENTER .
The option select screen appears with the current option OFF blinking (blinking indicates “changeable”).
4.Press 
or 
.
The displayed option changes (ON blinks).
5.Press ENTER to save the change.
The LCD returns to the <<SETUP MODE>> menu screen (Skew Check).
6.Press CANCEL two times.
The LCD returns to the Ready screen.
<<SETUP MODE>>
Settings
<<SETUP MODE>> Paper Length Check
<<SETUP MODE>>
Skew Check
Skew Check
Check: OFF
Skew Check
Check: ON
<<SETUP MODE>>
Skew Check
Ready
