Cautions
•Do not adjust the lens side in the adjustment in (5). Interference of exposure control between lens and camera body may cause noisy video image and hunting.
|
|
| Video lens | DC lens |
1 | 2 | 1 | Power supply | Brake |
3 | 4 |
| +9 V (50 mA maximum) |
|
|
|
|
|
|
| Lens side | 2 | NC | Brake (+) |
|
|
|
| |
| 3 | Driving signal | Driving (+) | |
|
| |||
|
|
|
|
|
|
| 4 | GND | Driving |
Cautions
•Note that wrong selection of iris switch or wrong connection of iris connector causes heating inside the camera, resulting in malfunction and failure.
5.3How to Adjust Back Focus and field angle
At factory setting, back focus is set to its standard position. However, slight readjustments may be needed depending on the type of zoom lens. Back focus is adjusted with the back focus adjustment ring at the top of the camera so that distance of the object can correctly meet the focus position of the lens when the lens is correctly installed.
For adjustment, loosen the mount ring lock screw with
- 12 -