Toshiba IK-1000 instruction manual Field Installation

Page 4

CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightening flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING :

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION :

CONNECT 12V DC UL LISTED CLASS 2 POWER SUPPLY.

FIELD INSTALLATION :

WORDED : “THIS INSTALLATION SHOULD BE MADE BY A QUALIFIED SERVICE PERSON AND SHOULD CONFORM TO ALL LOCAL CODES.”

FCC NOTICE

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

USER-INSTALLER CAUTION : Your authority to operate this FCC verified equipment could be voided if you make changes or modifications not expressly approved by the party.

NOTICE

When the warning display "FAN STOP" appears on screen, contact your local representative for replacement of the radiation fan.

A radiation fan is a consumable item. Even if the warning is not displayed, replace it every 30,000 hours as a guide. This service life is just a rule of thumb for replacement cycle and does not assure the part's performance.

- 4 -

Image 4
Contents Table of Contents CCD Color CameraPage Important Safeguards Field Installation On installation, observe the following matters Install the camera in a location free from noiseOperating ambient temperature and humidity Outdoor installationWhen cleaning the camera ComponentsNames and Functions Handling of the protection capPage Setting screens 4Tripod setting hole Connection Lens Adjustment How to Adjust IrisAvailable Lens Automatic iris lensHow to Adjust Back Focus and field angle Operation Sens FunctionAuto Mode Manual modeWhite Balance ONE Push WB One Push White BalanceScene files Manual Manual white balanceMode Setting by on Screen Display Using the ScreensItems that can be set on screen display Sens sensitivity setting When Changing Setting of Auto Sens ModeChanging flicker correction Page Bold face on the diagram shows a detection area Data UP When Changing Settings of Manual mode Synchro. Scan mode WHT BAL White Balance Data UP Increase in redDecrease in red Data Down Data UP Increase in blueBold face on the diagram shows a detection area Mode ATW When Changing Settings of Manual Manual White Balance Mode Process Process Option Option Data UP Increase of gain Decrease of gain Data Down Troubleshooting Stop of useExternal View Specifications ManuPage Page Page Page Page One 1 Year