Toshiba IK-1000 instruction manual 4Tripod setting hole

Page 9

!4Tripod setting hole

Used when fixing a camera to the tripod.

Cautions

•When attaching the camera to a tripod, fasten the tripod to the camera tripod setting hole without sliding them from each other. If not fixed securely, the camera may drop, causing personal injury.

•Use a tripod screw that is between 4 mm and 8 mm in length.

!5Iris selection switch	Select the types of automatic iris lenses (DC lens and Video
	lens).

!6C mount ring, lock screw !7C mount ring

Locks back focus adjusting ring.

Install the C mount lens.

- 9 -

Image 9

Contents CCD Color Camera Table of ContentsPage Important Safeguards Field Installation Install the camera in a location free from noise On installation, observe the following mattersOperating ambient temperature and humidity Outdoor installationComponents When cleaning the cameraNames and Functions Handling of the protection capPage Setting screens 4Tripod setting hole Connection How to Adjust Iris Lens AdjustmentAvailable Lens Automatic iris lensHow to Adjust Back Focus and field angle Sens Function OperationManual mode Auto ModeONE Push WB One Push White Balance White BalanceManual Manual white balance Scene filesUsing the Screens Mode Setting by on Screen DisplayItems that can be set on screen display When Changing Setting of Auto Sens Mode Sens sensitivity settingChanging flicker correction Page Bold face on the diagram shows a detection area Data UP When Changing Settings of Manual mode Synchro. Scan mode Data UP Increase in red WHT BAL White BalanceDecrease in red Data Down Data UP Increase in blueBold face on the diagram shows a detection area Mode ATW When Changing Settings of Manual Manual White Balance Mode Process Process Option Option Data UP Increase of gain Decrease of gain Data Down Stop of use TroubleshootingExternal View Manu SpecificationsPage Page Page Page Page One 1 Year