Toshiba IK-1000 WHT BAL White Balance, Data UP Increase in red, Decrease in red Data Down

7.4 WHT BAL (White Balance)

WHT BAL has three modes: ONE PUSH WB, ATW and MANUAL.

Place the cursor “->” on MODE, press the [DATA UP] or [DATA DOWN] button, and select the desired mode from ONE PUSH WB, ATW, MANUAL.

7.4.1 When Changing Setting of ONE PUSH WB (One Push White Balance) Mode

Up/down movement			Set by DATA
by MENU UP/DOWN			UP/DOWN
				・Display of SCENE file
	-- 2 WHT BAL --		<FILE A>
				・WHT BAL mode	ONE PUSH WB, ATW, MANUAL
		MODE ONE PUSH WB		・R RAINT (offset) adjustment	-10 ～ 10
		R PAINT	0
		B PAINT	0	・B RAINT (offset) adjustment	-10 ～ 10
		AREA	PRESET A
				・Electronic multiplication gain	PRESET A, PRESET B,
					PRESET C, PRESET D,
					PRESET E, PRESET F,
					PRESET G,

(1)Changing R PAINT (red offset)

q Using the [MENU UP] or [MENU DOWN] button, place “→” on R PAINT. w Use the [DATA UP] or [DATA DOWN] button to make setting.

[DATA UP] Increase in red

–10 0 10

Decrease in red [DATA DOWN]

(2)Changing R PAINT (blue offset)

q Using the [MENU UP] or [MENU DOWN] button, place “→” on B PAINT. w Use the [DATA UP] or [DATA DOWN] button to make setting.

[DATA UP] Increase in blue

–10 0 10

Decrease in blue [DATA DOWN]

- 25 -