Toshiba IK-WP41A, Network Camera user manual Zoom / Focus / Iris, Preset, Scan

Zoom / Focus / Iris

Zoom In / Zoom Out:

Zoom In expands the view and Zoom Out reducesthe view. Click and hold to continuously zoom the camera.

Focus Near / Focus Far:

When clicked, focus will be set to manual mode and the lens focus will be adjusted. If the Pan/Tilt/Zoom button is clicked, it will return to Auto Focus.

NOTE: In a wide angle, the manual focus increments increase.

Iris Open / Iris Close:

When clicked, iris will be set to manual mode and the iris will be adjusted. If the Pan/Tilt/Zoom button is clicked, it will return to Auto Iris.

Preset

Setup method:

1.Move the camera to the desired position.

2.Input the preset position number.

3.Click the ‘Set’ button.

Move method:

1.Input the preset position number.

2.Click ‘Go to’ button.

NOTE:

Manual focus cannot be set as preset position.

Scan

To set the scan speed, refer to Camera Settings ￿ Basic ￿ Pan / Tilt ￿ Scan Speed.

Auto :

The camera will pan continuously until a manual pan, tilt, zoom, or Stop operation is performed.

(Zoom) At power-up, the zoom is fully zoomed out. When an auto scan is started directly, the zoom will maintain the last magnification.

(Tilt) At power-up, the tilt is set up by the Configuration. To set the tilt angle, refer to Camera Settings ￿ Basic ￿ Tilt Angle.

17