NOTE:
The status of the alarm blinks above the live video screen. Double click the status to clear the alarm
Motion detection doesn’t work during PTZ.
Even if a scene is changed by PTZ, detection area is not changed automatically. setup the detection area again.
Alarm Output
When the Alarm input is triggered, the camera will send out a signal through the Alarm output. (See the page 19 in the QSG. After alarm is triggered, this switch will short between COM and OPEN.)
You can set Alarm Mode as OFF or Event. If you choose OFF, this function will be closed, And you can set alarm dwell time as 1s, 5s, 10s, 15s, 30s, 60s by the menu of ‘Output Delay Time’.
32