Check the checkbox “ON”, then press the “Set Masking Zone” button.
Then a
Use mouse to drag a mask rectangle on the screen, click “Save” to save settings.
You can enable the PTZ function shown below by pressing the “PTZ” button in order to adjust an appropriate position. And in this mode, mouse PTZ is ON.
After adjusted, click ‘X’ on the PTZ function screen and close this window.
Finally, use the mouse to drag a mask zone on the
“T”: Zoom in
“W”: Zoom out
“N”: Focus near
“F”: Focus far
Go back to the “Privacy Zone Masking” section.
Video Codec
1.Select Video Codec.
2.Configure the options as described in the table below.
3.Click save.
28