Yamaha YSP-1000 owner manual Playing back sources

PLAYBACK
Playing back sources	Adjusting the volume

Once an input source is selected (see page 39), you can play back the selected input source.

Note

This section uses a DVD player as an example of the playback source.

y

For details on the TV and the DVD player you are using, refer to the owner’s manual supplied with the TV and the DVD player.

INPUT VOLUME + STANDBY/ON

1Turn on the power of your DVD player using the remote control supplied with the DVD player.

2Switch to the video input on your TV using the remote control supplied with the TV so that the DVD menu screen is displayed.

3If necessary, turn down the volume of your TV until you cannot hear any sound.

4Press DVD on the remote control to select DVD as the input source.

DVD

5Play back the DVD on your DVD player using the supplied remote control.

Audio signals from your DVD player are output from the speakers of this unit.

y

•If the output volume is too low, increase the volume on this unit to around –25 dB.

•If you have set the appropriate remote control codes for your TV and DVD player, you can use the remote control supplied with this unit to operate these components. For details on how to set remote control codes, see page 87.

VOLUME CH TV VOL

MUTE TV INPUT TV MUTE

Press VOLUME +/– on the front panel or on the remote control to increase or decrease the volume level.

The numeric value of the volume level appears in the front panel display.

Control range: 0.0 dB to –99.5 dB, MIN (minimum)

VOLUME

VOLUME +

	or
Front panel	Remote control

VOL

VOLUME MUTE appears at the minimum volume level.

VOL

Notes

•The volume level of all input sources (including multi-channel as well as stereo sources) changes at the same time.

•0.5 dB of the volume level increases or decreases each time you press VOLUME +/–.

•You can continuously increase or decrease the volume level if you press and hold VOLUME +/–.

40