Yamaha YSP-1000 owner manual Beam Menu, Asetting Parameter 1/3, Setting parameters

Page 72

MANUAL SETUP

BEAM MENU

Use to manually adjust various parameters related to the sound beam output.

SET MENU → MANUAL SETUP → BEAM MENU

2 BEAM MENU

.

•Select FLAT TO WALL if this unit is installed in parallel with the wall in your listening room. Adjust the width and length of your listening room as well as the distance of the listening position from this unit and the distance of the center of this unit from the left wall.

Listening position from the left wall

p

p

■SETTING PARAMETERS

(Setting parameters)

Room length

Listening position from the unit

Use to set the position of this unit in your listening room and the distance of this unit from the listening position. When you make settings for each parameter, other related parameters are automatically adjusted to best match your listening environment.

Note

If you make adjustments in SETTING PARAMETERS, the beam optimization settings made in the AUTO SETUP procedure will be lost. If you want to keep the beam optimization settings made in the AUTO SETUP and make further adjustments, adjust settings in BEAM ADJUSTMENT first (see page 71).

A)SETTING PARAMETER 1/3

.

;;;;;FLAT TO WALL INSTALLED HEIGHT

;;;;;;;;;;;;1.0m

[p

p

p

p

[ENTER]:Return

INSTALLED POSITION (Installed position of this unit)

Use to adjust the installed position of this unit.

Choices: FLAT TO WALL (Parallel to wall installation),

ANGLE TO WALL OR CORNER (Corner installation)

FLAT TO WALL				ANGLE TO WALL
FLAT TO WALL				OR CORNER

Room width

Choices for the room width and length: 2.0 m to 12.0 m

Choices for the listening position from this unit: 2.0 m to 9.0 m

Choices for the listening position from the left wall: 0.6 m to 11.4 m

A)SETTING PARAMETERS 2/3

Room width and length

12.0m 12.0m

[p		p				p	p
		[ENTER]:Return
A)SETTING PARAMETERS 3/3
Listening position from the
Listening position from the
unit and the left wall					12.0m
unit and the left wall		12.0m			12.0m


[p		p				p	p
		[ENTER]:Return

70

Image 72

Contents YSP-1000 For U.K. Customers Contents Overview Features Auto SetupUsing this Manual Install this unit in your listening roomRun Auto Setup Connect this unit to your TV and other external componentsSupplied Accessories Controls and Functions Front panelInput STANDBY/ONFront panel display Rear panel Remote control VOL Mode MacroInputmode SleepInstallation Before installing this unitInstalling this unit Parallel installationInstallation examples ExampleUsing a metal wall bracket Using a standUsing a TV stand Using a rackAffixing this unit FastenersConnections For audio input For video inputFor video output Audio connection Video connectionConnecting a TV Audio connections Video connectionsCables used for audio connections Cables used for video connectionsConnecting a DVD player/recorder DVD player/recorderConnecting a VCR Audio connectionsAnalog audio Video Output Connecting a digital satellite tuner or a cable TV tuner Digital satellite tuner or a cable TV tunerConnecting a digital airwave tuner Digital airwave tunerConnecting other external components Cables used for connectionsCD player, etc Optical digital Output Connecting a subwoofer Subwoofer Monaural Input Rear panel of this unitConnecting the power supply cable Affixing the optical cableAbout the RS-232C/REMOTE IN/IR-OUT terminals Installing batteries in the remote control Operation range of the remote controlClose the battery cover Getting StartedUsing the remote control Turning on the power VOL Mode Surround Menu ReturnUsing SET Menu Displaying the OSDOther buttons that display the OSD OSD screen exampleFlow chart of SET Menu Run Basic SetupRun Manual Setup Look for a remedyAuto Setup Flow chart of Auto SetupInstalling the optimizer microphone Side view Optimizer microphoneExample of using a tripod Example of using the supplied cardboard microphone standAssembling the supplied cardboard Microphone stand Center line TripodUsing Auto Setup Auto Setup Preparation SET MenuBeam OPT+SOUND Optimz Press Mounting Mounting To select and configure Installing InstallingEach parameter and then press Enter Reflecting ReflectingPreparation Preparation Auto Beam OptimizationAcoustic Optimization Show ResultError messages for Auto Setup Before the Auto Setup procedure startsWhile the Auto Setup procedure is in progress Using the System Memory Memory2MEMORY Save EnterLoading settings Press Enter againPress Menu to exit Memory 1MEMORY Load Press / to select Load and then press 6 Press Enter againRemote control operations PlaybackSelecting the input source Front panel operationsPlaying back sources Press Mute on the remote control to mute the sound Muting the soundFlashes Lights upBeam Mode Beam mode Stereo plus 3 beam modePress 5BEAM on the remote control to select the 5 beam mode Press 3BEAM on the remote control to select the 3 beam mode Press Stereo on the remote control to select the stereo modeTarget mode Decoder indicators Status IndicatorEnjoying Surround Sound Surround modes and recommended sourcesEnjoying 2-channel sources in surround sound Remote control to select a surround mode Press TV on the remote controlPress Surround repeatedly or press Surround and then press / onAdjusting surround mode Press YSP on the remote control to switch toPress Surround on the remote control Press / to configure the parameterWhen Dolby Pro Logic II Music is selected When DTS Neo6 Music is selectedUsing Sound Field Programs What is a sound field?Elements of a sound field Early reflectionsSound field program descriptions Music sound field programs Movie sound field programs Sports sound field programAdjusting Cinema DSP levels Press / on the remote controlUsing the Volume Mode Nightcinema Nightmusic TV Equal VOL Night OFFEffect.LvlMIN Effect.LvlMID Effect.LvlMAX Using TruBass Press on the remote controlUsing Trubass Using the Sleep Timer Setting the sleep timerUnit to confirm the setting for the sleep timer Flashes Lights upCanceling the sleep timer DisappearsBasic Setup Basic Setup SET MenuPress / to select Basic Setup and then press Enter Displaying the SET Menu screenBasic Setup Room Type ?Room Type Room type Installed Position Installed position of this unit If Square is selected for Room TypeIf Rectangle is selected for Room Type Left CenterRoom Size ? Room Size Room sizeSmall Small MID Medium Large Large Setup OK Confirming settings SmallLarge Setup OK? Press Menu to complete the Basic Setup procedurePress / to select YES or no and then press Enter Manual Setup Sound MenuBeam Menu Input MenuUsing Manual Setup Manual SetupPress / to select Manual Setup and then press Enter Press / / / and Enter to configure each parameterAsetting Parameter 1/3 Setting parametersInstalled Position Installed position of this unit Beam MenuBbeam Adjustment Beam Adjustment Beam adjustmentInstalled Height Installed height of this unit Horizontal Angle Horizontal angle Vertical Angle Vertical angleBeam Travel Length Beam travel length Focal Length Focal length Treble Gain Treble gainCimage Location Sound MenuAtone Control Image Location Image locationBbeam Level Csubwoofer SETBeam Level Beam level Subwoofer SET Subwoofer setEaudio Delay Dmute LevelFroom EQ Binput Mode Input MenuAinput Assignment 1/4 Ainput Assignment 2/4Cinput Trim Dinput RenameInput Trim Input trim Input Rename Input renameDisplay Menu Adimmer SETBosd SET Cunit SETAdjusting System Parameters Press Enter on the remote controlRelease Input on the front panel Protecting the current settings Press / to adjust the maximum volume levelInitializing the current settings Press / to switch between Protect on Protect OFFAdjusting the audio balance Using the test tonePress / to switch between Preset Reset and Preset Cancel Using the audio output being played Back Press / to select the speaker you want to adjustPress / to adjust speaker volumes Press Test when you have completed all your adjustmentsOperation Advanced Selecting the Input Mode AutoDTS AnalogRemote Control Features Setting remote control codesUsing the remote control Refer to Controlling other components onControlling other components Operating your TVOperating your DVD player TV MuteOperating your VCR player Press VCR to select VCR as the input sourceUsing the TV macro Setting macros for the TV with the tuning capabilitySetting macros for the TV without the tuning capability Canceling the macrosOperating macros Troubleshooting GeneralDTS indicator does not light up There is noise interference when aSee Distorted or too little bass sound Too much bass soundRemote control Glossary Audio formatsAudio information Index Audio pin cableSpecifications AMP SectionSpeaker Section GeneralVCR DVD PlayerCable TV Tuner Satellite TunerWG11470