Yamaha YSP-1000 Cimage Location, Sound Menu, Atone Control, Image Location Image location

MANUAL SETUP

■IMAGE LOCATION (Image location)

Use to adjust the direction from which the front left and right speaker sound is heard by directing these audio signals so that they are also output from the center speaker.

Use this feature to redirect audio signals if the sound coming from the left and right speakers seems unnatural, such as when your listening position is not the center of your listening room.

You can only adjust this parameter when 3 beam mode or 5 beam mode is selected as the beam mode (see page 44). Choices: ON, OFF

Setting range: 0% to 95%

Initial setting: 0%

C)IMAGE LOCATION

	. OFF		) ON
	L	C	R
		p
	LEFT;;;;;;;;;;0%
	RIGHT;;;;;;;;;0%
[p	p		p	p
	[ENTER]:Return

LEFT (Left)

Adjusts audio signals towards the left.

The higher the percentage, the louder the output from the center.

Without adjustment	With the front left
	speaker adjusted

RIGHT (Right)

Adjusts audio signals towards the right.

The higher the percentage, the louder the output from the center.

	With the front right
Without adjustment	speaker adjusted

SOUND MENU

Use to manually adjust various parameters related to the sound output.

SET MENU → MANUAL SETUP → SOUND MENU

1 SOUND MENU

. A)TONE CONTROL

B)BEAM LEVEL C)SUBWOOFER SET D)MUTE LEVEL E)AUDIO DELAY F)ROOM EQ

G)DD/DTS Dynamic Range

p p

■TONE CONTROL (Tone control)

You can adjust the tonal quality of your speakers.

A)TONE CONTROL

.	;;;;0dB	-	+
	;;;;;;0dB

[p	p	p	p
	[ENTER]:Return

TREBLE (Treble)

Use to adjust the high frequency response. Choices: –12 dB to +12 dB

Initial setting: 0 dB

BASS (Bass)

Use to adjust the low frequency response.

Choices: –12 dB to +12 dB

Initial setting: 0 dB

74