Camera Operation
SSNR (Samsung Super Noise reduction)
The background noise in the low light level decreases automatically as the level of gain changes.
1.Please position the arrow to point to 'SSNR' on the SETUP menu by using the UP and DOWN buttons.
2.Please select the mode you wish to operate by pressing the LEFT or RIGHT
button.
SETUP
LENSMANUAL
SHUTTER ESC
WHITE BAL. ATW
BACKLIGHT OFF
AGCLOW
SSNRLOW
SPECIAL
OFF : There is no reduction in noise level.
LOW : There is a small reduction in noise level with almost no ghost image.
MIDDLE : The most effective mode. There is a sufficient reduction in noise levels without causing much ghost imaging.
HIGH : The level of noise is reduced greatly, however there is an increase in ghost imaging.
Note
• When AGC is turned off, SSNR does not operate.
SENS UP (Low illuminance)
SENS UP helps maintain a bright, clear screen image by automatically detecting changes in the level of light in low light level conditions.
1.Please position the arrow to point to 'SENS UP' on the SETUP menu by using the UP and DOWN buttons.
2.Please select the mode you wish to operate by pressing the LEFT or RIGHT button.
AUTO : Low light level auto mode
OFF : The function does not operate.
Note
•When SHUTTER is in the manual mode, SENS UP does not operate.
•When AGC is turned off, SENS UP does not operate.
SETUP
LENSMANUAL
SHUTTER ESC
WHITE BAL. ATW
BACKLIGHT OFF
AGCLOW
SSNRLOW
SPECIAL
EXIT
3. Please press the SETUP button when all the settings are complete.
Note
•The maximum storage magnification in low light level movement situations can be adjusted by pressing the SETUP button in 'AUTO' mode.(X2~X128)
•As the magnification increases, the screen gets brighter; however the after image also increases.
•If storage magnification is increased while SENS UP is operating, it may cause noise, and spots may appear; however this is normal.
COLOR CCD CAMERA 28 User’s Manual | COLOR CCD CAMERA 29 User’s Manual |