Samsung SDC-415 instruction manual Lens selection, DC/VIDEO Auto iris lens selection

Page 12

Camera Operation

SETUP

Select any function you

LENS

MANUAL

Modes can be changed

wish to operate by

SHUTTER

ESC

using the LEFT and

using the UP and

WHITE BAL.

ATW

RIGHT buttons.

DOWN buttons.

BACKLIGHT

OFF

 

 

AGC

LOW

 

 

SSNR

LOW

 

 

SENS-UP

OFF

 

 

SPECIAL

 

 

 

EXIT

 

 

3.Please press the LEFT or RIGHT button if you wish to change mode.

When the LEFT or RIGHT button is pressed, available values and modes are displayed in order. Please keep pressing the button until you get to the mode you wish to operate.

4.Please select 'EXIT' and then press the SETUP button to finish the setting.

Note

If appears at the mode you wish to operate, it means that there is a sub- menu which can be selected by pressing the SETUP button.

If appears at the mode item, it means that there is no mode available to be selected.

LENS (selection)

This function is used to adjust the brightness of the screen.

1.When the SETUP menu is displayed on the screen, please position the arrow to point to 'LENS' by using the UP and DOWN buttons.

2.Please select the type of the lens you wish to use by pressing the LEFT or

RIGHT button.

SETUP

LENSDC

SHUTTER ---

WHITE BAL. ATW

BACKLIGHT OFF

DC/VIDEO : Auto iris lens selection

Note

When using an auto iris lens, the setting of the auto iris lens selection switch, located on the back of the camera, must be on DC or VIDEO depending on the type of the lens which is being used. (Please refer to the picture on page 12)

The brightness of the screen can be adjusted in DC mode. The brightness can be adjusted within the range of 0 ~ 100. The optimum level of brightness for the user can be achieved by adjustment.

MANUAL : Manual lens selection

3. Please press the SETUP button if you wish to return to the previous menu.

COLOR CCD CAMERA 22 User’s Manual

COLOR CCD CAMERA 23 User’s Manual

Image 12
Contents SDC-415 Series Signal System Horizontal Resolution 530 TV Lines High SensitivitySsnr Samsung Super Noise Reduction Electronic IrisContents Precautions Them to physical shocks Strong light directlyComponents Names and Functions of PartsFront Auto iris lens connection plug Mount adaptorAuto iris lens connector SideMounting bracket screw hole Installation When using an auto iris lensBack LensWhen using a C-Mount lens When using a CS-Mount lensConnecting to a monitor Connecting to powerAC Power Type AC 24V, 500mA DC Power Type DC 12V, 500mA Settings Camera OperationMenu Lens selection DC/VIDEO Auto iris lens selectionShutter condition and speed control White Balance controlBACKLIGHTBacklight Compensation AGC Auto Gain ControlSsnr Samsung Super Noise reduction Sens UP Low illuminanceSpecial Color Exit Troubleshooting Problems TroubleshootingSpecifications SDC-415NA SDC-415ND SDC-415PA SDC-415PDMemo