Samsung SDC-415 instruction manual Problems Troubleshooting

Page 19

Troubleshooting

If there are problems in operation, please refer to the items below. If the problem persists, please contact the agent you purchased this product from.

Problems

 

Troubleshooting

Nothing appears on the

Please check the power connection.

screen.

Please check the video signal line connection.

 

 

Please check and make sure that the auto lens

 

 

switch is set to DC (VIDEO) when using a VIDEO

 

 

(DC) lens.

 

 

 

The video image is not

Please check if the lens is clean.

clear.

 

Please clean the lens with a clean cloth or brush.

 

Please adjust the contrast feature of the monitor.

 

Please make sure that the screen is not exposed

 

 

directly to a bright light.

 

 

Please move the camera if necessary.

 

Please readjust the back focus of the camera.

The screen is dark. • Please adjust the contrast feature of the monitor.

If you have an intermediate device, set the 75/ Hi-z properly, and check the terminals. (refer to page 18)

Please check if an auto iris lens is being used and adjust the brightness level.

There is a problem with • Please check if an appropriate power source to

the camera operation. the camera complies with the manufacturer's

The camera surface is standard requirement, or if the voltage keeps

too hot and black stripes changing. appear on the screen.

Problems

 

Troubleshooting

The MOTION

• Please check if 'MOTION DETECTION' mode is

DETECTION function is

 

turned on.

not working.

Please check if the MD LEVEL is too low.

 

 

Please check the setting of the MD AREA.

 

 

 

Colors are not quite

Please check the 'WHITE BAL' setting. (Please

right.

 

refer to page 25)

 

 

 

The screen is

Please check if the camera is facing directly into

flickering.

 

sunlight or fluorescent light.

 

Please check if an auto iris lens is being used.

 

Please check the connection of the lens

 

 

connector cable.

 

 

L/L mode isn't able to

• Have you connected your camera to DC power

be selected.

 

source? Connect it to AC power source.

 

 

L/L mode is not

• Please check the frequency of power supply

available.

 

(60Hz for NTSC, 50Hz for PAL).

 

 

 

COLOR mode is not

Please check if the AGC menu is set to the OFF

working.

 

position.

 

 

 

SENS-UP function is not

Please check if the AGC menu is set to the OFF

working.

 

position.

• Please check if the SHUTTER menu is set to MANUAL mode.

COLOR CCD CAMERA 36 User’s Manual

COLOR CCD CAMERA 37 User’s Manual

Image 19
Contents SDC-415 Series Signal System Electronic Iris Horizontal Resolution 530 TV LinesHigh Sensitivity Ssnr Samsung Super Noise ReductionContents Them to physical shocks Strong light directly PrecautionsAuto iris lens connection plug Mount adaptor ComponentsNames and Functions of Parts FrontSide Auto iris lens connectorMounting bracket screw hole Lens InstallationWhen using an auto iris lens BackWhen using a CS-Mount lens When using a C-Mount lensConnecting to power Connecting to a monitorAC Power Type AC 24V, 500mA DC Power Type DC 12V, 500mA Camera Operation SettingsMenu DC/VIDEO Auto iris lens selection Lens selectionWhite Balance control Shutter condition and speed controlAGC Auto Gain Control BACKLIGHTBacklight CompensationSens UP Low illuminance Ssnr Samsung Super Noise reductionSpecial Color Exit Problems Troubleshooting TroubleshootingSDC-415NA SDC-415ND SDC-415PA SDC-415PD SpecificationsMemo