Names and Functions of Parts
Back
Video output terminal
Sends video signals and connects to the video input terminal of the monitor.
Auto iris lens selection switch
Please change the mode to DC or VIDEO depending on the type of auto iris lens being used.
Setting button
●SETUP button : Used for the menu display. This button can be used to confirm settings after changing the value of the selected function or current conditions.
●UP & DOWN buttons : Used for selecting items by moving the cursor up or down on the menu screen.
●LEFT & RIGHT buttons : Used when changing item values, by moving the
cursor to the left or right on the menu screen.
Power input terminal
Connects to the power appropriate to each model.
Power lamp
Lights up when the correct power is supplied to the camera.
Installation
■Lens
Lenses are sold separately. Lenses such as an auto iris lens,
Note
•Use of the DC auto iris lens is recommended to achieve the best results for operating this product effectively.
•Please keep the lens clean.
•Any foreign objects and fingermarks on the lens can cause inferior image quality in low light level conditions.
When using an auto iris lens
1. Please peel off about 8mm of the outer skin of the auto iris lens cable.
approx. 8mm
2.Please peel off about 2mm of the outer skin of the insulated conductor inside the lens cable.
approx. 2mm
COLOR CCD CAMERA 14 User’s Manual | COLOR CCD CAMERA 15 User’s Manual |