Color

Camera Operation

5)When a name has been chosen, please select a position for the name display. Please move the cursor onto 'POS' and then press the SETUP button.

Camera ID

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z a b c d e f g h i j k l m n o p q r s t u v w x y z - . 1 2 3 4 5 6 7 8 9

CLR POS END

Note

•When the AGC is turned off, COLOR does not operate.

•When an infrared light is used, there may be a problem with focusing.

SYNC : Two SYNCHRONIZATION modes are available INTERNAL and EXTERNAL LINE-LOCK. In LINE-LOCK mode, it synchronizes the video signal between cameras without a synchronous generator. The line-lock synchronization is only used in the areas of 60Hz (NTSC Models) / 50Hz (PAL Models).

- INT : Internal synchronization - LL : External line-lock synchronization

The name will appear at the top left hand corner.

Please find the position you wish to display the name by using the 4 directional buttons, and then press the SETUP button.

FRONT DOOR

to Locate, then SET

FRONT DOOR

•If you choose ‘LL’, you can adjust the desired phase. Press the SET button.

•You can adjust the desired phase from 0 to 359.

Note

6) Please select 'END' and then press the SETUP button to complete ID input.

-AUTO : This camera has a function which automatically changes to the appropriate mode for daytime or night-time. The COLOR mode is operated for daytime, and it converts to BW mode for night-time.

- ON : The color mode is selected by default, and the modes do not change automatically.

•When the power frequency is 50Hz, you can not use line-lock mode(NTSC Models).

•When the power frequency is 60Hz, you can not use the line-lock mode(PAL Models).

•‘Sync.’ mode is fixed to ‘INT’ in DC 12V input power.

COLOR CCD CAMERA

32 User’s Manual

COLOR CCD CAMERA 33 User’s Manual