Sony SAL35F14G service manual HELP15

Page 25

HELP15

Adhesive bond (B-10):	J-6082-612-A
Grease (G-35):	J-6082-621-A

Anti-diffusion agent (A-20): J-6082-611-A

1.Apply the anti-diffusion agent (A-20) to the indicated portions of cam tube.

2.Apply the grease (G-35) to the cam tube, cam groove and them contact zone.

3.Attach the float ring so that the groove of cam tube places the bosses of float ring.

4.Apply the grease (G-35) to the indicated portions of cam tube retainer.

5.After tightening the cam tube retainer, loosen it about 10 to 15mm from dead end, apply the adhesive bond (B-10) to indicated portion.

6.Comform the movement of the cam tube.

After confirming the movement, apply the adhesive bond (B-10) in width of 5 to 10mm to 2 locations.

Cam Tube Retainer

Apply the grease (G-35) to holding surface sides of cam tube retainer.

Cam Tube

Apply the anti-diffusion agent (A-20)

Apply the anti-diffusion agent (A-20)

Apply the grease (G-35)

(6 locations of cam groove)

Apply the anti-diffusion agent (A-20)

Groove

Fixed Tube

Apply the grease (G-35)

Boss of float ring

						Cam Tube

			Cam Tube	Apply the grease (G-35)
Apply the grease				Cam Tube Retainer
(G-35)

Fixed Tube	Apply the adhesive bond (B-10)
	(circumference of 2 locations,
	width of 5 to 10mm)

Apply the grease (G-35)

(6 locations of cam groove)

Distance Control Tube

SAL35F14G (1.4/35G) (35mm F1.4G)

HELP

Image 25

Contents Service Note Repair Parts List Specifications DisassemblySpecifications Table of Contents Service Note Safety CHECK-OUT Aperture Trouble TroubleshootingFocus trouble Function NG Position NG Focus TroubleDisassembly Exploded View Ornamental Ring Block Outer Tube and Joint Tube Fixed Tube Block and Distance Control Tube Ornamental Ring Block and Focus Hold Button Base GROUP, 2 Group and 3 Group Lens Block HELP01 HelpHELP02 HELP03 HELP05 HELP04HELP07 HELP06HELP09 HELP08HELP10 HELP11 HELP12 HELP13 G7 G8 G9 G10 HELP14HELP15 HELP16 HELP17 HELP18 HELP19 HELP21 HELP20HELP23 HELP22Exploded Views Repair Parts ListLens Mount Riveting Block and Light Inter Ception Tube Outer Tube and Joint Tube 161 163 162 164 165 151 152 154 155 153 156 157 158 159 160 161202 203 209 208 204 205 212 213 211 253 255 Ref. No.73 Ref. No.60Ref. No.110 Checking supplied accessories Other accessories Supplied AccessoriesPreparations List of Service Tools and EquipmentsChart Mm collimator Download of PC card setup file InstaCal.exe Lens Adjustment Program ActuatorCheckerEquipment used SAL35F14G 1.4/35G 35mm F1.4G Setup of PC Card SAL35F14G 1.4/35G 35mm F1.4G SAL35F14G 1.4/35G 35mm F1.4G Confirmation of PC card setting Startup of Lens Adjustment Program ActuatorChecker.exe Finished Inspection JIG Lens EquipmentInitial Setting of ActuatorChecker Model Aperture Diameter Check Aperture Diameter CHECK/ADJUSTMENTPreparations Checking of Image Checking Method SpecificationAperture Diameter Adjustment Adjusting Method Projective Resolving Power Check Plane mirror Number of the smallest pitched lines Flange Back f’F Check Flange Back f’F CHECK/ADJUSTMENTFrange Back f’F Check Optical Axis AdjustmentOver Infinity Infinity End Flange Back f’F Adjustment Focus-shift mm = 0 to +0.15 Perform the 4-9. Write dSB Click ROM Data Lens ROM CheckCase of error display in the ROM Data Focus Brush Position Check Search Focus Adjustment Point Focus Brush Position CHECK/ADJUSTMENTCase of error display in the Search Focus Adjustment Point Click the Focus Adjustment Point Focus Brush Position Check Focus Adjustment PointCase of error display in the Focus Adjustment Point Click the Focus Pattern Focus Brush Pattern CheckFocus Brush PatternCase of error display in the Focus Pattern near position Case of error display in the Focus Pattern infinity position Click the Focus Hold Button Focus Hold Button Check Focus Hold ButtonCase of error display in the Focus Hold Button Write dSB Case of error in the Write dSB Application of printing Switching aReversing the screens displayed once Finding a textVer Contents Rev Issued