Sony SAL35F14G service manual Case of error display in the Focus Pattern near position

Page 71

4)When the Near position check finishes normally, the message “Move FOCUS to Infinity position at about 5sec.” is displayed on the pop-up window.

Set the focus to the infinity position and press down the ENTER key.

Fig.4-7-18

5)When the infinity position check finishes normally, “OK” is displayed on the pop-up window, and press the ENTER key to return to the initial window.

Fig.4-7-19

3. In case of error display in the Focus Pattern (near position)

1)When the error display and the NG display appear to the pop-up window, press the ENTER key to return to the initial window, and perform “2. Checking Method”again.

Fig.4-7-20

Fig.4-7-21

2)Although the lens is positioned at the near position, if “NG” appears, confirm or perform the following.

•4-7-1. Focus Brush Position Check (Search Focus Adjustment Point)

•Cleaning of flexible pattern or the brush.

•Replaceing the brush.

•Rotating operation error of the focus ring (rotation speed is not suitable at a regulated speed.).

3)Perform “2. Checking Method”again, repeat the inspection until “OK” appears on the pop-up window.

SAL35F14G (1.4/35G) (35mm F1.4G)

4-32

Image 71

Contents Service Note Repair Parts List Specifications DisassemblySpecifications Table of Contents Service Note Safety CHECK-OUT Aperture Trouble TroubleshootingFocus trouble Function NG Position NG Focus TroubleDisassembly Exploded View Ornamental Ring Block Outer Tube and Joint Tube Fixed Tube Block and Distance Control Tube Ornamental Ring Block and Focus Hold Button Base GROUP, 2 Group and 3 Group Lens Block HELP01 HelpHELP02 HELP03 HELP05 HELP04HELP07 HELP06HELP10 HELP08HELP09 HELP11 HELP12 HELP13 G7 G8 G9 G10 HELP14HELP15 HELP16 HELP17 HELP18 HELP19 HELP21 HELP20HELP23 HELP22Exploded Views Repair Parts ListLens Mount Riveting Block and Light Inter Ception Tube Outer Tube and Joint Tube 161 163 162 164 165 151 152 154 155 153 156 157 158 159 160 161202 203 209 208 204 205 212 213 211 253 255 Ref. No.110 Ref. No.60Ref. No.73 Checking supplied accessories Other accessories Supplied AccessoriesPreparations List of Service Tools and EquipmentsChart Mm collimator Equipment used Lens Adjustment Program ActuatorCheckerDownload of PC card setup file InstaCal.exe SAL35F14G 1.4/35G 35mm F1.4G Setup of PC Card SAL35F14G 1.4/35G 35mm F1.4G SAL35F14G 1.4/35G 35mm F1.4G Confirmation of PC card setting Startup of Lens Adjustment Program ActuatorChecker.exe Finished Inspection JIG Lens EquipmentInitial Setting of ActuatorChecker Model Preparations Aperture Diameter CHECK/ADJUSTMENTAperture Diameter Check Checking of Image Checking Method SpecificationAperture Diameter Adjustment Adjusting Method Projective Resolving Power Check Plane mirror Number of the smallest pitched lines Flange Back f’F Check Flange Back f’F CHECK/ADJUSTMENTFrange Back f’F Check Optical Axis AdjustmentOver Infinity Infinity End Flange Back f’F Adjustment Focus-shift mm = 0 to +0.15 Perform the 4-9. Write dSB Click ROM Data Lens ROM CheckCase of error display in the ROM Data Focus Brush Position Check Search Focus Adjustment Point Focus Brush Position CHECK/ADJUSTMENTCase of error display in the Search Focus Adjustment Point Click the Focus Adjustment Point Focus Brush Position Check Focus Adjustment PointCase of error display in the Focus Adjustment Point Click the Focus Pattern Focus Brush Pattern CheckFocus Brush PatternCase of error display in the Focus Pattern near position Case of error display in the Focus Pattern infinity position Click the Focus Hold Button Focus Hold Button Check Focus Hold ButtonCase of error display in the Focus Hold Button Write dSB Case of error in the Write dSB Finding a text Switching aApplication of printing Reversing the screens displayed onceVer Contents Rev Issued