[Description of main button functions on toolbar of the Adobe Acrobat Reader Ver5.0 (for Windows)]
Printing a text
1.Click the Print button 
.
2.Specify a printer, print range, number of copies, and other op- tions, and then click [OK].
Application of printing:
To set a range to be printed within a page, select the graphic
selection tool 
and drag on the page to enclose a range to be printed, and then click the Print button.
Toolbar
Reversing the screens displayed once
•To reverse the previous screens (operation) one by one, click
the 
.
•To advance the reversed screens (operation) one by one, click
the 
.
Application to the Service Manual:
This function allows you to go and back between circuit dia- gram and printed circuit board diagram, and accordingly it will be convenient for the voltage check.
Finding a text
1.Click the Find button 
.
2.Enter a character string to be found into a text box, and click the [Find]. (Specify the find options as necessary)
Application to the Service Manual:
To execute “find” from current page toward the previous pages, select the check box “Find Backward” and then click the “Find”.
3.Open the find dialog box again, and click the [Find Again] and you can find the matched character strings displayed next. (Character strings entered previously are displayed as they are in the text box.)
Application to the Service Manual:
The parts on the drawing pages (block diagrams, circuit dia- grams, printed circuit boards) and parts list pages in a text can be found using this find function. For example, find a Ref. No. of IC on the block diagram, and click the [Find Again] continuously, so that you can move to the Ref. No. of IC on the circuit diagram or printed circuit board diagram succes- sively.
Note: The find function may not be applied to the Service Manual depending on the date of issue.
Switching a page
•To move to the first page, click the 
.
•To move to the last page, click the 
.
•To move to the previous page, click the 
.
•To move to the next page, click the 
.
Moving with link
1.Select either palm tool 
, zoom tool 
, text selection tool
, or graphic selection tool 
.
2.Place the pointer in the position in a text where the link exists (such as a button on cover and the table of contents page, or
blue characters on the removal flowchart page or drawing page),
and the pointer will change to the forefinger form 
.
3.Then, click the link. (You will go to the link destination.)
Moving with bookmark:
Click an item (text) on the bookmark pallet, and you can move
to the link destination. Also, clicking 
can display the hidden items.
(To go back to original state, click 
)
Zooming or rotating the screen display
“Zoom in/out”
•Click the triangle button in the zoom control box to select the
display magnification. Or, you may click 
or 
for zoom- ing in or out.
“Rotate”
•Click rotate tool , and the page then rotates 90 degrees each.
Application to the Service Manual:
The printed circuit board diagram you see now can be changed to the same direction as the set.