Sony SAL35F14G service manual HELP17

HELP17

Adhesive bond (B-40):	J-6082-614-A
Grease (G-115):	J-6082-627-A

Anti-diffusion agent (A-20): J-6082-611-A

1.Apply the anti-diffusion agent (A-20) to the indicated portions of the torque ring A.

2.Apply the grease (G-115) to contact zone of the torque ring A, the float ring and the scissors lever block.

3.Attach the float ring and the scissors lever block to the torque ring A, tighten the screw temporarily.

Note: When turning the float ring, to become shake is minimized and to become turn the float ring smoothly, do the adjustment of the changing wick pin of scissors lever block.

4.Attach the float ring B to float ring A shown in the figure, apply the adhesive bond (B-40) to the screws and tighten them.

Apply the adhesive bond (B-40)

Apply the anti-diffusion agent (A-20)

Apply the adhesive bond (B-40)

Torque Ring A

Apply the anti-diffusion agent (A-20)

Apply the adhesive bond (B-40)

Float RIng

Scissors lever block

Scissors lever block

Torque Ring B

Apply the anti-diffusion agent (A-20)

Torque Ring A

Charging Wick Pin

Torque Ring A

Scissors	Float RIng
lever block

Apply the grease (G-115)

SAL35F14G (1.4/35G) (35mm F1.4G)

HELP