Sony SAL35F14G service manual HELP16

Page 26

HELP16

Adhesive bond (B-40):	J-6082-614-A
Grease (G-35):	J-6082-621-A
Grease (G-80):	J-6082-625-A

Anti-diffusion agent (A-20): J-6082-611-A

1.Apply the anti-diffusion agent (A-20) and the grease (G-35) to the indicated portion of the fixed tube.

2.Apply the grease (G-80) to contact zone of the torque ring B, the fixed tube and the friction (SP).

3.Apply the grease (G-80) to contact zone of the torque ring punching stopper and the float ring and the fixed tube.

4.Attach the torque ring punching stopper to the fixed tube with indicated.

5.Attach the friction (SP) and torque ring A shown in the figure, apply the adhesive bond (B-40) to the screws and tighten them.

6.Apply the grease (G-80) to contact zone of the distance control tube and the control tube guide pin.

7.Loosen the stopper screw of the scissors lever block, align the distance control tube to the scissors lever and attach them. Apply the adhesive bond (B-40) to the control tube guide pin and tighten them.

8.Tighten the stopper screw of the scissors lever block.

Apply the adhesive bond (B-40)

Apply the adhesive bond (B-40)

Torque Ring A

Scissors lever block

Apply the adhesive bond (B-40)

Apply the anti-diffusion agent (A-20)

Friction (SP)

Fixed Tube

Apply the grease (G-35)

short

long

Torque Ring

Punching Stopper

Control Tube Guide Pin

Apply the adhesive bond (B-40)

Distance Control Tube

Torque Ring

Punching Stopper

long

short

Apply the grease (G-35)

long

short

Torque Ring

Punching Stopper

Groove

Control Tube

Guide Pin

Apply the adhesive bond (B-40)

Apply the adhesive bond (B-40)

Control Tube Guide Pin

Fixed Tube

Torque Ring B

Torque Ring A

Friction (SP)

Fixed Tube

Apply the grease (G-80)

Torque Ring

Punching Stopper

Apply the grease (G-80)

Fixed Tube

Apply the grease (G-80)

Distance Control Tube

Control Tube

Guide Pin

SAL35F14G (1.4/35G) (35mm F1.4G)

HELP

Image 26

Contents Specifications Disassembly Service Note Repair Parts ListSpecifications Table of Contents Service Note Safety CHECK-OUT Troubleshooting Aperture TroubleFocus Trouble Focus trouble Function NG Position NGDisassembly Exploded View Ornamental Ring Block Outer Tube and Joint Tube Fixed Tube Block and Distance Control Tube Ornamental Ring Block and Focus Hold Button Base GROUP, 2 Group and 3 Group Lens Block Help HELP01HELP02 HELP03 HELP04 HELP05HELP06 HELP07HELP10 HELP08HELP09 HELP11 HELP12 HELP13 HELP14 G7 G8 G9 G10HELP15 HELP16 HELP17 HELP18 HELP19 HELP20 HELP21HELP22 HELP23Repair Parts List Exploded ViewsLens Mount Riveting Block and Light Inter Ception Tube Outer Tube and Joint Tube 151 152 154 155 153 156 157 158 159 160 161 161 163 162 164 165202 203 209 208 204 205 212 213 211 253 255 Ref. No.110 Ref. No.60Ref. No.73 Supplied Accessories Checking supplied accessories Other accessoriesList of Service Tools and Equipments PreparationsChart Mm collimator Equipment used Lens Adjustment Program ActuatorCheckerDownload of PC card setup file InstaCal.exe SAL35F14G 1.4/35G 35mm F1.4G Setup of PC Card SAL35F14G 1.4/35G 35mm F1.4G SAL35F14G 1.4/35G 35mm F1.4G Confirmation of PC card setting Startup of Lens Adjustment Program ActuatorChecker.exe Equipment Finished Inspection JIG LensInitial Setting of ActuatorChecker Model Preparations Aperture Diameter CHECK/ADJUSTMENTAperture Diameter Check Checking of Image Specification Checking MethodAperture Diameter Adjustment Adjusting Method Projective Resolving Power Check Plane mirror Number of the smallest pitched lines Flange Back f’F CHECK/ADJUSTMENT Flange Back f’F CheckOptical Axis Adjustment Frange Back f’F CheckOver Infinity Infinity End Flange Back f’F Adjustment Focus-shift mm = 0 to +0.15 Perform the 4-9. Write dSB Lens ROM Check Click ROM DataCase of error display in the ROM Data Focus Brush Position CHECK/ADJUSTMENT Focus Brush Position Check Search Focus Adjustment PointCase of error display in the Search Focus Adjustment Point Focus Brush Position Check Focus Adjustment Point Click the Focus Adjustment PointCase of error display in the Focus Adjustment Point Focus Brush Pattern CheckFocus Brush Pattern Click the Focus PatternCase of error display in the Focus Pattern near position Case of error display in the Focus Pattern infinity position Focus Hold Button Check Focus Hold Button Click the Focus Hold ButtonCase of error display in the Focus Hold Button Write dSB Case of error in the Write dSB Reversing the screens displayed once Switching aApplication of printing Finding a textContents Rev Issued Ver