Vivotek IP7151, IP7152 manual Rtsp SDP

	adddeny	Add a set of deny IP address range to server. Start
		and end parameters must be specified. If the index
		parameter is specified, it will try to add starting
		from index position.
	deleteallow	Remove a set of allow IP address range from
		server. If start and end parameters are specified, it
		will try to remove the matched IP address. If index
		is specified, it will try to remove the address from
		given index position. [start, end] parameters have
		higher priority then the [index] parameter.
	deletedeny	Remove a set of deny IP address range from
		server. If start and end parameters are specified, it
		will try to remove the matched IP address. If index
		is specified, it will try to remove the address from
		given index position. [start, end] parameters have
		higher priority then the [index] parameter.
start	<ip address>	The start IP address to add or to delete.
end	<ip address>	The end IP address to add or to delete.
index	<value>	The start position to add or to delete.
return	<return page>	Redirect to the page <return page> after the
		parameter is assigned. The <return page> can be
		a full URL path or relative path according the the
		current path. If you omit this parameter, it will
		redirect to an empty page.

RTSP SDP

Note: This request requires viewer access privilege

Method: GET/POST

Syntax:

http://<servername>/viewer/<0~(n-1)>/<network_accessname_<0~(m-1)>> rtsp://<servername>/<0~(n-1)>/<network_accessname_<0~(m-1)>>

- 100 -

www.vivotek.com

T: 886-2-82455282

F: 886-2-82455532