Vivotek IP7152, IP7151 manual Camera control panel doesn’t show up in `Fixed Camera’ mode

Page 50

Camera control panel doesn’t show up in `Fixed Camera’ mode

If there is any PTZ camera attached, users should select the“RS485 Settings” as “PTZ camera”. Users have to configure the camera id, PTZ driver, and ports settings correctly. The ID is specific to the camera and necessary for multiple camera control. Please refer to the PTZ camera’s user manual for ID settings. The network camera has three built-in PTZ camera drivers, including DynaDome/SmartDOME, Lilin PIH-7x00, and Pelco D protocol. For user’s convenience, users can upload their alternative PTZ driver to the Video Server. Please refer to the maintenance page for more information about how to upload your PTZ driver file.

Note that the Network Camera can support multiple protocols to PTZ cameras. If there are PTZ camera functions can’t work, please see your PTZ camera’s user manual to check if your camera supports these functions.

- 49 -

www.vivotek.com

T: 886-2-82455282

F: 886-2-82455532

Image 50
Contents Page Technical@vivotek.com Before You Use This Product Table of Contents Ddns Rtsp SDP Package Contents Installation Hardware installationSoftware installation 6 5 4 3 2Add Password to prevent Unauthorized Access Initial Access to the Network CameraCheck Network Settings Authentication How to UseInstalling plug-in 886-2-82455282 886-2-82455532 Primary user’s capability Main Screen with Camera View886-2-82455282 886-2-82455532 886-2-82455282 886-2-82455532 Here is the layout in Firefox when it is Jpeg streaming Digital Zoom MP4 RecordingSnapshot LanguageClient settings 886-2-82455282 886-2-82455532 Digital output Administrator’s capabilityFine-tuning for Best Performance For Viewing by Mobile Phone For Best Real-time Video Images Protect Network Camera by passwords Opening accounts for new usersBuild a security application Software revision upgrade Definitions in Configuration System parameters Security settings 886-2-82455282 886-2-82455532 Network settings Network typeHttp Rtsp Streaming886-2-82455282 886-2-82455532 Url http//Network Camera/setup/network.html Wlan Settings IP7152 only Tkip AES Ddns Access List Video orientation Video SettingsAudio and Video Audio settings Url http//Network Camera/setup/audiovideo.htm Image Settings Privacy Mask 886-2-82455282 886-2-82455532 CCD Settings Motion detection Url http//Network Camera/setup/motion.htm Camera control 886-2-82455282 886-2-82455532 Camera control panel doesn’t show up in `Fixed Camera’ mode Preset position Custom command Application Event Server 886-2-82455282 886-2-82455532 Media Recording Url http//Network Camera/setup/recording.htm System log Viewing system parameters Url http//Network Camera/setup/parafile.htm Maintenance Url http//Network Camera/setup/maintain.htm Troubleshooting Status LEDStyle convention URL commands of the Network CameraOverview General CGI URL syntax and parameters Security levelGet server parameter values Method GET/POSTSet server parameter values Parameter pairUpdate Available parameters on the server Valid Values DescriptionNTP server 886-2-82455282 886-2-82455532 886-2-82455282 886-2-82455532 GMT Integer Inactive status Group security Name Value Multicast video port Build-in Set bit rate in bps when choose Cmos Window Wini0~2height Height Motion Providerhos Logemerg Name Value Security Description 886-2-82455282 886-2-82455532 Videoincodec Audiooutcodec Detection Parameter Value Security Description Port to connect the server Video clip in seconds Drive the digital output Query status of the digital input Query status of the digital output Capture single snapshot QualityAccount management System logs Upgrade firmware IP filteringRtsp SDP 101 Technical specifications System and HardwareImage settings Technology License Notice MPEG-4 AAC Technology MPEG-4 Visual TechnologyElectromagnetic Compatibility EMC Liability