Vivotek IP7152, IP7151 manual Event

Page 54

<url> http://<Network Camera>/setup/application.htm

<Network Camera> is the domain name or original IP address of the Network Camera.

Event

“Event name” The unique name for event “Enable this event” Check it to enable this event. “Priority” The event with higher priority will be executed first.

“Delay second(s) before detecting next event” The delay to check next event. It is used in motion detection and digital input trigger type.

There are four kinds of trigger supported.

“Video motion detection” Select the windows which need to be monitored. “Periodic” The event is triggered in specified intervals. The unit of trigger interval is minute.

“Digital input” To monitor digital input

“System boot” The event is triggered when the system bootup. The weekly and time schedules are provided.

- 53 -

www.vivotek.com

T: 886-2-82455282

F: 886-2-82455532

Image 54
Contents Page Technical@vivotek.com Before You Use This Product Table of Contents Ddns Rtsp SDP Package Contents Installation Hardware installationSoftware installation 6 5 4 3 2Initial Access to the Network Camera Check Network SettingsAdd Password to prevent Unauthorized Access How to Use Installing plug-inAuthentication 886-2-82455282 886-2-82455532 Primary user’s capability Main Screen with Camera View886-2-82455282 886-2-82455532 886-2-82455282 886-2-82455532 Here is the layout in Firefox when it is Jpeg streaming Digital Zoom MP4 RecordingSnapshot LanguageClient settings 886-2-82455282 886-2-82455532 Administrator’s capability Fine-tuning for Best PerformanceDigital output For Viewing by Mobile Phone For Best Real-time Video Images Protect Network Camera by passwords Opening accounts for new usersBuild a security application Software revision upgrade Definitions in Configuration System parameters Security settings 886-2-82455282 886-2-82455532 Network settings Network typeHttp Rtsp Streaming886-2-82455282 886-2-82455532 Url http//Network Camera/setup/network.html Wlan Settings IP7152 only Tkip AES Ddns Access List Video Settings Audio and VideoVideo orientation Audio settings Url http//Network Camera/setup/audiovideo.htm Image Settings Privacy Mask 886-2-82455282 886-2-82455532 CCD Settings Motion detection Url http//Network Camera/setup/motion.htm Camera control 886-2-82455282 886-2-82455532 Camera control panel doesn’t show up in `Fixed Camera’ mode Preset position Custom command Application Event Server 886-2-82455282 886-2-82455532 Media Recording Url http//Network Camera/setup/recording.htm System log Viewing system parameters Url http//Network Camera/setup/parafile.htm Maintenance Url http//Network Camera/setup/maintain.htm Troubleshooting Status LEDURL commands of the Network Camera OverviewStyle convention General CGI URL syntax and parameters Security levelGet server parameter values Method GET/POSTSet server parameter values Parameter pairUpdate Available parameters on the server Valid Values DescriptionNTP server 886-2-82455282 886-2-82455532 886-2-82455282 886-2-82455532 GMT Integer Inactive status Group security Name Value Multicast video port Build-in Set bit rate in bps when choose Cmos Window Wini0~2height Height Motion Providerhos Logemerg Name Value Security Description 886-2-82455282 886-2-82455532 Videoincodec Audiooutcodec Detection Parameter Value Security Description Port to connect the server Video clip in seconds Drive the digital output Query status of the digital input Query status of the digital output Capture single snapshot QualityAccount management System logs Upgrade firmware IP filteringRtsp SDP 101 Technical specifications System and HardwareImage settings Technology License Notice MPEG-4 AAC Technology MPEG-4 Visual TechnologyElectromagnetic Compatibility EMC Liability