Vivotek IP7151, IP7152 manual Url http//Network Camera/setup/recording.htm

Page 59

recording item is the same as the one in application page. User can know the recording name, status, weekly and time schedule, stream source and destination of recording. There can be at most two recording entries. To do recording on network storage, please add network storage server in application page first.

<url> http://<Network Camera>/setup/recording.htm

<Network Camera> is the domain name or original IP address of the Network Camera.

“Recording entry name” The unique name for recording entry “Enable this recording” Check it to enable this event. “Priority” The recording with higher priority will be executed first. “Source” The source of stream, stream1 or stream2.

The weekly and time schedules are provided.

“Sun” ~ “Sat” Select the days of the week to perform the event. “Time” shows “Always” or input the time interval. “Destination” Network storage server user added.

“Total cycle recording size” The total size for cycle recording in Kbytes “Size of each file for recording” The single file size in Kbytes

- 58 -

www.vivotek.com

T: 886-2-82455282

F: 886-2-82455532

Image 59

Contents Page Technical@vivotek.com Before You Use This Product Table of Contents Ddns Rtsp SDP Package Contents Hardware installation Installation6 5 4 3 2 Software installationAdd Password to prevent Unauthorized Access Initial Access to the Network CameraCheck Network Settings Authentication How to UseInstalling plug-in 886-2-82455282 886-2-82455532 Main Screen with Camera View Primary user’s capability886-2-82455282 886-2-82455532 886-2-82455282 886-2-82455532 Here is the layout in Firefox when it is Jpeg streaming MP4 Recording Digital ZoomLanguage SnapshotClient settings 886-2-82455282 886-2-82455532 Digital output Administrator’s capabilityFine-tuning for Best Performance For Viewing by Mobile Phone For Best Real-time Video Images Opening accounts for new users Protect Network Camera by passwordsBuild a security application Software revision upgrade Definitions in Configuration System parameters Security settings 886-2-82455282 886-2-82455532 Network type Network settingsRtsp Streaming Http886-2-82455282 886-2-82455532 Url http//Network Camera/setup/network.html Wlan Settings IP7152 only Tkip AES Ddns Access List Video orientation Video SettingsAudio and Video Audio settings Url http//Network Camera/setup/audiovideo.htm Image Settings Privacy Mask 886-2-82455282 886-2-82455532 CCD Settings Motion detection Url http//Network Camera/setup/motion.htm Camera control 886-2-82455282 886-2-82455532 Camera control panel doesn’t show up in `Fixed Camera’ mode Preset position Custom command Application Event Server 886-2-82455282 886-2-82455532 Media Recording Url http//Network Camera/setup/recording.htm System log Viewing system parameters Url http//Network Camera/setup/parafile.htm Maintenance Url http//Network Camera/setup/maintain.htm Status LED TroubleshootingStyle convention URL commands of the Network CameraOverview Security level General CGI URL syntax and parametersMethod GET/POST Get server parameter valuesParameter pair Set server parameter valuesUpdate Valid Values Description Available parameters on the serverNTP server 886-2-82455282 886-2-82455532 886-2-82455282 886-2-82455532 GMT Integer Inactive status Group security Name Value Multicast video port Build-in Set bit rate in bps when choose Cmos Window Wini0~2height Height Motion Providerhos Logemerg Name Value Security Description 886-2-82455282 886-2-82455532 Videoincodec Audiooutcodec Detection Parameter Value Security Description Port to connect the server Video clip in seconds Drive the digital output Query status of the digital input Query status of the digital output Quality Capture single snapshotAccount management System logs IP filtering Upgrade firmwareRtsp SDP 101 System and Hardware Technical specificationsImage settings MPEG-4 AAC Technology MPEG-4 Visual Technology Technology License NoticeLiability Electromagnetic Compatibility EMC