Vivotek IP7151 manual Wlan Settings IP7152 only

Page 35

WLAN Settings (IP7152 only)

“SSID” (Service Set Identifier), it is a name that identifies a wireless network. Access Points and wireless clients attempting to connect to a specific WLAN (Wireless Local Area Network) must use the same SSID. The default setting is default. Note: The maximum length of SSID is 32 single-byte characters and SSID can’t be any of “, <, > and space character.

“Wireless mode” Clicking on the pull-down menu to select from the following options:

“Infrastructure” Make the Network Camera connect to the WLAN via an Access Point. (The default setting)

“Ad-Hoc”Make the Network Camera connect directly to a host equipped with a wireless adapter in a peer-to-peer environment.

“Channel” While in infrastructure mode, the channel is selected automatically to match the channel setting for the selected Access Point. In Ad-Hoc mode, the channel must be manually set to the same channel for each wireless adapter. The default channel setting depends on the installed region.

“TX rate” This field is for selecting the maximum transmission rate on the network. The default setting is “auto”, that is the Network Camera will try to connect to the other wireless device with highest transmitting rate.

“Security” Select the data encrypt method “None” – No data encryption.

“WEP” – allows communication only with other devices with identical WEP settings. “WPA-PSK”– Use WPA pre-shared key.

“WPA2-PSK”– Use WPA2 pre-shared key.

“Auth Mode” Choosing one of the following modes, (Open is the default setting). “Open” – communicates the key across the network.

“Shared” – allows communication only with other devices with identical WEP settings.

“Key length” The administrator can select the key length among 64 or 128 bits. 64bits is the default setting.

“Key format” Hexadecimal or ASCII. “HEX” is the default setting. “HEX” digits consist of the numbers 0~9 and the letters A-F.

- 34 -

www.vivotek.com

T: 886-2-82455282

F: 886-2-82455532

Image 35

Contents Page Technical@vivotek.com Before You Use This Product Table of Contents Ddns Rtsp SDP Package Contents Hardware installation Installation6 5 4 3 2 Software installationAdd Password to prevent Unauthorized Access Initial Access to the Network CameraCheck Network Settings Authentication How to UseInstalling plug-in 886-2-82455282 886-2-82455532 Main Screen with Camera View Primary user’s capability886-2-82455282 886-2-82455532 886-2-82455282 886-2-82455532 Here is the layout in Firefox when it is Jpeg streaming MP4 Recording Digital ZoomLanguage SnapshotClient settings 886-2-82455282 886-2-82455532 Digital output Administrator’s capabilityFine-tuning for Best Performance For Viewing by Mobile Phone For Best Real-time Video Images Opening accounts for new users Protect Network Camera by passwordsBuild a security application Software revision upgrade Definitions in Configuration System parameters Security settings 886-2-82455282 886-2-82455532 Network type Network settingsRtsp Streaming Http886-2-82455282 886-2-82455532 Url http//Network Camera/setup/network.html Wlan Settings IP7152 only Tkip AES Ddns Access List Video orientation Video SettingsAudio and Video Audio settings Url http//Network Camera/setup/audiovideo.htm Image Settings Privacy Mask 886-2-82455282 886-2-82455532 CCD Settings Motion detection Url http//Network Camera/setup/motion.htm Camera control 886-2-82455282 886-2-82455532 Camera control panel doesn’t show up in `Fixed Camera’ mode Preset position Custom command Application Event Server 886-2-82455282 886-2-82455532 Media Recording Url http//Network Camera/setup/recording.htm System log Viewing system parameters Url http//Network Camera/setup/parafile.htm Maintenance Url http//Network Camera/setup/maintain.htm Status LED TroubleshootingStyle convention URL commands of the Network CameraOverview Security level General CGI URL syntax and parametersMethod GET/POST Get server parameter valuesParameter pair Set server parameter valuesUpdate Valid Values Description Available parameters on the serverNTP server 886-2-82455282 886-2-82455532 886-2-82455282 886-2-82455532 GMT Integer Inactive status Group security Name Value Multicast video port Build-in Set bit rate in bps when choose Cmos Window Wini0~2height Height Motion Providerhos Logemerg Name Value Security Description 886-2-82455282 886-2-82455532 Videoincodec Audiooutcodec Detection Parameter Value Security Description Port to connect the server Video clip in seconds Drive the digital output Query status of the digital input Query status of the digital output Quality Capture single snapshotAccount management System logs IP filtering Upgrade firmwareRtsp SDP 101 System and Hardware Technical specificationsImage settings MPEG-4 AAC Technology MPEG-4 Visual Technology Technology License NoticeLiability Electromagnetic Compatibility EMC