4.Check the “Event operation”. The triggering condition can be set to detected motion or status of the attached device,
5.Set the delay before detecting next event to avoid continuous false alarms following the original event,
6.Set the delay to take snapshots after event to capture the direction of the moving objects,
Send Snapshots When Motion is Detected
If no external sensor is available, the Administrator can use the
Enable
7.Click on “Motion detection” in the left column,
8.Check “Enable motion detection”,
9.Click on “New” to have a new window to monitor video,
10.Type in a name to identify the new window,
-23 -
www.vivotek.com