Vivotek PT3127, PT3117 manual Streaming, Wlan Configuration

Page 37

when the Administrator changes the HTTP port of the Network Camera whose IP address is 192.168.0.100 from 80 to 8080, the User must type in the web browser “http://192.168.0.100:8080” instead of “http://192.168.0.100”.

Streaming

Control channel port” This can be something other than the default port 5001 in order to work with the port opened by the firewall.

Audio channel port” This can be something other than the default port 5002 in order to work with the port opened by the firewall.

Video channel port” This can be something other than the default port 5003 in order to work with the port opened by the firewall.

Improve audio quality in low bandwidth environment” If the Network Camera seems to work in a low bandwidth network environment, the User can use this option to see if audio quality can be improved by sacrificing some real-time synchronization.

WLAN Configuration

“SSID” (Service Set Identifier), it is a name that identifies a wireless network. Access Points and wireless clients attempting to connect to a specific WLAN (Wireless Local Area Network) must use the same SSID. The default setting is default. Note: The maximum length of SSID is 32 single-byte characters and SSID can’t be any of “, <, > and space character.

“Wireless mode” Clicking on the pull-down menu to select from the following options:

“Infrastructure” Make the Network Camera connect to the WLAN via an Access Point. (The default setting)

“Ad-Hoc”Make the Network Camera connect directly to a host equipped with a wireless adapter in a peer-to-peer environment.

- 30 -

www.vivotek.com

T:886-2-82455282 F: 886-2-82455532

Image 37
Contents Page Technical@vivotek.com Before You Use This Product Table of Contents FTP 886-2-82455282 F Package Contents To install in Ethernet Hardware InstallationTo install in wireless LAN Software Installation 886-2-82455282 F 886-2-82455282 F 886-2-82455282 F Check Network Settings Initial Access to the Network CameraAdd Password to Prevent Unauthorized Access Authentication How to UseInstalling Plug-in Main Screen with Camera View Primary User’s CapabilitiesCamera view ConfigurationZoom Pan Pan/tilt control buttonsClient Settings Url http//Network Camera/protocol.html Fine-tuning for Best Performance Administrator’s CapabilitiesFor Best Real-time Video Images Only Quality Images Will Do Somewhere Between Real-time and Clear ImagesViewing Double size image Opening Accounts for New Users Protect Network Camera by passwordsProduct Demo for e-Business Large-Scale Service Demo on Multiple Sites Mid-Scale ServiceBuilding a Multimedia Web Attraction Site More flexible options for viewers886-2-82455282 F 886-2-82455282 F 886-2-82455282 F Building a Security Application Send Snapshots When Motion is Detected 886-2-82455282 F Software Revision Upgrade Definitions in Configuration System Parameters User Group Administration General Network SettingsStreaming Wlan Configuration886-2-82455282 F Tkip AES Mail & FTPFTP Ddns and UPnP Settings Audio Parameters Audio/Video Codec ParametersVideo Parameters 886-2-82455282 F Camera Control Area Camera ControlPreset Function Area Motion Detection Weekly Schedule Application SetupEvent Operation Sequential Operation Remote Controller Viewing System Log Factory DefaultViewing System Parameters Appendix TroubleshootingFrequently Asked Questions 886-2-82455282 F 886-2-82455282 F Capture Update Snapshot of Jpeg Image URL Commands of the Network CameraRestore Factory Default Settings Query Status of the Digital InputRestart System System Resource URL URLSystem Configuration URL General Format of Command URLNetwork Configuration URL Security Configuration URLWlan Ssid Ddns & UPnP Configuration URL Mail&FTP Configuration URL Audio/Video Configuration URL Normal image Camera Control URLApplication Configuration URL Image Quality Configuration URLSeconds delay to capture post-event Pan Pan/Tilt DataTilt 886-2-82455282 886-2-82455532 System Technical SpecificationsMPEG-4 Visual Technology Technology License NoticeLiability Electromagnetic Compatibility EMC