Remote Controller
Models PT3117 and PT3127 both provide a remote controller to command the camera’s pan/tilt and other functions. The direction control part provides the function as on the main web page.
The Pan/Patrol/Stop functions are also the same as on the main web page.
Direction control area
Auto movement control area
“Auto Patrol” This button commands the camera to patrol between the preset positions on the patrol list that was set on the “Camera control page”. After each patrol cycle, the camera stops at the original staring position. “Auto Pan” This button commands the camera to pan from the current position to the left most or right most and back. After panning both horizontal end positions, the camera would stop at the original starting position.
“Center” This calibrates the camera’s position to aim at the center as the camera boots up.
“Stop” This stops the auto movements (auto pan & auto patrol) of the camera.
- 42 -
www.vivotek.com