Vivotek PT3117, PT3127 manual 886-2-82455282 F

Page 38

“Channel” While in infrastructure mode, the channel is selected automatically to match the channel setting for the selected Access Point. In Ad-Hoc mode, the channel must be manually set to the same channel for each wireless adapter. The default channel setting depends on the installed region.

“TX rate” This field is for selecting the maximum transmission rate on the network. The default setting is “auto”, that is the Network Camera will try to connect to the other wireless device with highest transmitting rate.

“Security” Select the data encrypt method

“None” – No data encryption.

“WEP” – allows communication only with other devices with identical WEP settings.

“WPA-PSK”– Use WPA pre-shared key.

“Auth Mode” Choosing one of the following modes, (Open is the default setting).

“Open” – communicates the key across the network.

“Shared” – allows communication only with other devices with identical WEP settings.

“Key length” The administrator can select the key length among 64 or 128 bits. 64bits is the default setting.

“Key format” Hexadecimal or ASCII. “HEX” is the default setting.

“HEX” digits consist of the numbers 0~9 and the letters A-F.

“ASCII” is a code for representing English letters as numbers from 0-127 except “, <, > and space characters that are reserved.

“Network Key” Entering a key in either hexadecimal or ASCII format. When selecting different key length, acceptable input length is listed as following:

64 bits key length: 10 Hex digits or 5 characters.

- 31 -

www.vivotek.com

T:886-2-82455282 F: 886-2-82455532

Image 38
Contents Page Technical@vivotek.com Before You Use This Product Table of Contents FTP 886-2-82455282 F Package Contents Hardware Installation To install in EthernetTo install in wireless LAN Software Installation 886-2-82455282 F 886-2-82455282 F 886-2-82455282 F Add Password to Prevent Unauthorized Access Initial Access to the Network CameraCheck Network Settings How to Use AuthenticationInstalling Plug-in Primary User’s Capabilities Main Screen with Camera ViewZoom ConfigurationCamera view Pan/tilt control buttons PanClient Settings Url http//Network Camera/protocol.html For Best Real-time Video Images Administrator’s CapabilitiesFine-tuning for Best Performance Viewing Double size image Somewhere Between Real-time and Clear ImagesOnly Quality Images Will Do Protect Network Camera by passwords Opening Accounts for New UsersBuilding a Multimedia Web Attraction Site Demo on Multiple Sites Mid-Scale ServiceProduct Demo for e-Business Large-Scale Service More flexible options for viewers886-2-82455282 F 886-2-82455282 F 886-2-82455282 F Building a Security Application Send Snapshots When Motion is Detected 886-2-82455282 F Software Revision Upgrade Definitions in Configuration System Parameters User Group Administration Network Settings GeneralWlan Configuration Streaming886-2-82455282 F Mail & FTP Tkip AESFTP Ddns and UPnP Settings Video Parameters Audio/Video Codec ParametersAudio Parameters 886-2-82455282 F Camera Control Camera Control AreaPreset Function Area Motion Detection Event Operation Application SetupWeekly Schedule Sequential Operation Remote Controller Viewing System Parameters Factory DefaultViewing System Log Troubleshooting AppendixFrequently Asked Questions 886-2-82455282 F 886-2-82455282 F Restore Factory Default Settings URL Commands of the Network CameraCapture Update Snapshot of Jpeg Image Query Status of the Digital InputRestart System URL System Resource URLGeneral Format of Command URL System Configuration URLSecurity Configuration URL Network Configuration URLWlan Ssid Ddns & UPnP Configuration URL Mail&FTP Configuration URL Audio/Video Configuration URL Camera Control URL Normal imageImage Quality Configuration URL Application Configuration URLSeconds delay to capture post-event Tilt Pan/Tilt DataPan 886-2-82455282 886-2-82455532 Technical Specifications SystemTechnology License Notice MPEG-4 Visual TechnologyElectromagnetic Compatibility EMC Liability