Adcom GTP-760 owner manual AC Convenience Outlets 115VAC models, Remote Control

Page 20

29 AC Convenience Outlets (115VAC models)

These outlets are for low-current source components only. They are not designed for power amplifiers.

The single unswitched outlet is live whenever the GTP-760 is plugged into a live AC source. The two switched outlets are live only when the GTP-760 is fully operational (i.e., whenever the front power button’s LED is red.) They are not live when the GTP-760 is in standby mode (when the LED is yellow.)

Observe the wattage limitations printed above the two switched and one unswitched outlets. Note that the 500VA figure (equivalent to 500 watts) above the two switched outlets is a maximum figure for both outlets combined. Do not exceed this limit.

We strongly recommend the use of our surge suppresser/ line conditioners, the ADCOM ACE family of products, for systems with substantial amplifiers and many source components. The ACE products relieve the GTP-760 from handling large current surges, while they protect your entire system by filtering and conditioning the AC current. In addition to the numerous heavy duty AC outlets of the ACE-315, the ACE-615 includes sequential power-up and power-down modes to minimize “thumps” whenever you turn your system on or off.

1.3The Remote Control

The GTP-760 remote control is a learning remote control that is capable of saving commands for all remote controls in your home theater system. In this way, you may eliminate the confusion of using multiple remotes. Although such power comes with some added complexity, the complexity is minimal and with some repetition will become second nature.

The single most important aspect to master about the GTP-760 remote control is the function of the eight source select buttons at the top of the remote. These are buttons 30 in the figure on the next page. Each of these buttons cause two things to happen when used. First, they select the corresponding input on the GTP-760. Second, THESE KEYS REMAP ALL OF THE OTHER BUTTONS ON THE REMOTE CONTROL. You can think of each of these buttons as having a page of commands associated with it.

Most of the GTP-760 remote commands are saved under the main remote page. Whenever you desire to control the GTP-760 via remote, you must first ensure the main page is active. As an example, press main on the remote control. Now, press the dim button. If your GTP-760 is on, the brightness of the front panel display changes. Notice also that the main button on your remote illuminates. This serves as a reminder that the main remote page is currently active.

Now press the CD button and then the select/play button. Notice now that the CD source button lights. The CD remote page is now active. If you have an ADCOM CD player, this command will cause an idle CD to play. Now, press the dim button again. You should note that CD button does not light. The dim command is not preprogrammed in the CD remote page. If your GTP-760 is on you will also notice the display does not respond to this command. Press the main button again to reenter the main remote page. The dim button will now again change the GTP-760 display.

The button description that follows distinguishes the function of each button dependent on the page the remote is in. The remote is shipped from the factory with ADCOM commands saved under the main, tuner and CD pages.

The ADCOM universal remote controller is preset to operate most GTP-760 functions (MAIN device mode), GTP-760 AM/FM tuner functions (TUNER device mode) and GCD-700/750 CD functions (CD device mode).

19

Page 19 Page 21
Image 20
Page 19 Page 21
Contents GTP-760 Page Safety Notification Explanation of Graphic SymbolsAdcom Protection Plan USA only Concealed Shipping DamageTable of Contents Surround Modes Tuner Room Initial SetupOn Screen Display Product Features Front Panel ControlsPage Rear Panel Inputs & Outputs System Connections Yellow centersDigital Audio inputs Center Channel and SubwooferComposite or S-Video? DVD Digital Audio/Standard Composite Video Inputs I g g e r o u t 21 12 Volt Trigger Output VCR Inputs and OutputsVideo Processor Inputs and Outputs Video Aux InputRoom 2 Outputs CD Inputs Tape Inputs and OutputsStandard Composite Video Monitor Outputs Video Inputs and Outputs Preamplifier Outputs Video Processor On/Off SwitchRemote Control Connections AC Power Cord Receptacle export models 27 5.1 Channel InputsRemote Control AC Convenience Outlets 115VAC models54 55 Power Volume Up/DownTuning Up/Down Input Selectors tape, LDDown arrow/Stop Select/PlayShift 44 FM/AMRear Up Rear DownCenter Up Center DownDig.2 Main Tuner All OthersDig.1 Introduction Programming Your Adcom GTP-760 Remote ControllerUsing Preprogrammed Commands Programming Your Own Commands Deleting clearing Individual Programmed Commands Macro CommandsConnections INSTALLING/CONNECTING the GTP-760Placement Channel Delays What this section is all aboutDIM L DIM C DIM R DIM LS DIM RS Preset 3 Main Large, Center On, Rears On, Subwoofer On Preset 1 Main Small, Center On, Rears On, Subwoofer OnPreset 2 Main Large, Center On, Rears On, Subwoofer Off By Ear Sound MeterInput Settings Operating Mode Selection Basic OperationPage Programming Preset Stations Tuner Selecting stationsListening to Preset Stations Setting Room 2 Playback VolumeRoom 2 Operation Introduction Operating Room 2 From the Front PanelTrouble Shooting Operating Room 2 From RoomPage CARE, MAINTENANCE, and Service Specifications GTP-760 This page has been interntionally left blank Timber Lane Marlboro, NJ Tel 732 Fax 732

GTP-760 specifications

The Adcom GTP-760 is a high-performance audio/video surround processor that combines advanced technology with ease of use, delivering an exceptional home theater experience. At the heart of the GTP-760 is its extensive support for various audio formats, including Dolby Digital, DTS, and MPEG. This enables the processor to provide an immersive audio experience, allowing users to enjoy their favorite movies, music, and games with remarkable clarity.

One of the standout features of the GTP-760 is its multiple input options. It comes equipped with a range of analog and digital inputs, including HDMI, allowing for seamless integration with a variety of audio and video sources. The HDMI inputs support 4K video pass-through and scaling, making the GTP-760 a future-proof option for home theater setups. Additionally, the inclusion of S-Video, composite, and component video connections ensures compatibility with older devices.

The GTP-760 also offers a comprehensive equalization system, allowing users to tailor their audio output to suit their room’s acoustics and personal preferences. The built-in audio DSP (Digital Signal Processor) delivers advanced sound processing capabilities, enhancing the overall listening experience. With customizable sound modes, users can select settings optimized for music, movies, or gaming, ensuring versatility for different content types.

User friendliness is a focal point of the GTP-760 design. The intuitive front panel controls and the ergonomic remote make navigation a breeze, while the backlit display provides clear visibility, even in low light environments. Additionally, the processor features programmable memory settings, allowing users to save different configurations for quick access.

Beyond audio performance, the GTP-760 offers robust video processing capabilities. It supports various video formats, ensuring high-quality picture output regardless of the source. The unit’s solid build quality and premium components contribute to its reliability and longevity.

In conclusion, the Adcom GTP-760 is a well-rounded surround processor that delivers outstanding sound quality and video processing capabilities. Its variety of input options, advanced audio technologies, and user-friendly design make it an excellent choice for both amateur and avid home theater enthusiasts. With its ability to enhance audio-visual experiences, the GTP-760 stands out as a remarkable addition to any entertainment system.
Top Page Image Contents