Adcom GTP-760 Down arrow/Stop, Select/Play, Shift, 44 FM/AM, Stereo, Enter, 48 d. dynamic range

Page 23

40Down arrow/Stop

•In main mode, this is preprogrammed to scroll down to the next choice on a menu screen.

•In CD mode, it is preprogrammed to stop an ADCOM CD player.

•In tuner mode, it is preprogrammed to start scanning preset frequencies lower than the current station.

•The button is programmable for use with any other source.

41Select/Play

•In main mode, this is preprogrammed to enter a selection chosen via the menu system.

•In CD mode, it is preprogrammed to start an ADCOM CD player.

•The button is programmable for use with any other source.

42Direct Access Keypad (buttons “1” through “10,” and “+10”)

•In Tuner mode, buttons “1” through “7” are preprogrammed to access preset stations.

•In CD mode, buttons are preprogrammed as track access commands for the ADCOM CD player.

•The buttons are programmable for use with any other source.

43Shift

•In Tuner mode, button is preprogrammed to access presets 8 through 14 (“Shift” + “2” = preset number 9, etc.)

•In CD mode, button is preprogrammed as “call” command for ADCOM CD player.

•The button is programmable for use with any other source.

44FM/AM

•In Tuner mode, button is preprogrammed to switch between FM and AM bands.

•In CD mode, button is preprogrammed as “repeat” command for ADCOM CD player.

•The button is programmable for use with any other source.

45Stereo

•In Tuner mode, button will change playback from Stereo to Mono.

•In CD mode, button is preprogrammed as “program/memory” command for ADCOM CD player.

•The button is programmable for use with any other source.

•In main it will switch to 2 channel.

46Srnd (surround)

•In main mode, button is preprogrammed to step through GTP-760’s various operation modes.

•In CD mode, button is preprogrammed to initiate random play with ADCOM CD player.

•The button is programmable for use with any other source.

47Enter

•In tuner mode, button is preprogrammed to select “manual” or “seek” tuning modes.

•In CD mode, button is preprogrammed as “time” command for ADCOM CD player.

•The button is programmable for use with any other source.

48d. (dynamic) range

•In main mode, button is preprogrammed to adjust dynamic range of Dolby Digital encoded sources.

•In CD mode, button is preprogrammed to access disc 1 with ADCOM CD player.

•The button is programmable for use with any other source.

49dialog

•In main mode, button is preprogrammed to call up or cancel “dialog enhance” equalization.

•In CD mode, button is preprogrammed to begin and end “A-B” repeat with ADCOM CD player.

•The button is programmable for use with any other source.

22

Page 22 Page 24
Image 23
Page 22 Page 24
Contents GTP-760 Page Explanation of Graphic Symbols Safety NotificationConcealed Shipping Damage Adcom Protection Plan USA onlyTable of Contents Surround Modes Tuner Room Initial SetupOn Screen Display Front Panel Controls Product FeaturesPage Center Channel and Subwoofer Rear Panel Inputs & Outputs System ConnectionsYellow centers Digital Audio inputsComposite or S-Video? DVD Digital Audio/Standard Composite Video Inputs I g g e r o u t VCR Inputs and Outputs 21 12 Volt Trigger OutputVideo Processor Inputs and Outputs Video Aux InputRoom 2 Outputs CD Inputs Tape Inputs and OutputsStandard Composite Video Monitor Outputs Video Inputs and Outputs Preamplifier Outputs Video Processor On/Off SwitchRemote Control Connections 27 5.1 Channel Inputs AC Power Cord Receptacle export modelsAC Convenience Outlets 115VAC models Remote Control54 55 Input Selectors tape, LD PowerVolume Up/Down Tuning Up/Down44 FM/AM Down arrow/StopSelect/Play ShiftCenter Down Rear UpRear Down Center UpDig.2 Main Tuner All OthersDig.1 Introduction Programming Your Adcom GTP-760 Remote ControllerUsing Preprogrammed Commands Programming Your Own Commands Macro Commands Deleting clearing Individual Programmed CommandsConnections INSTALLING/CONNECTING the GTP-760Placement What this section is all about Channel DelaysDIM L DIM C DIM R DIM LS DIM RS Preset 3 Main Large, Center On, Rears On, Subwoofer On Preset 1 Main Small, Center On, Rears On, Subwoofer OnPreset 2 Main Large, Center On, Rears On, Subwoofer Off Sound Meter By EarInput Settings Basic Operation Operating Mode SelectionPage Tuner Selecting stations Programming Preset StationsOperating Room 2 From the Front Panel Listening to Preset StationsSetting Room 2 Playback Volume Room 2 Operation IntroductionOperating Room 2 From Room Trouble ShootingPage CARE, MAINTENANCE, and Service Specifications GTP-760 This page has been interntionally left blank Timber Lane Marlboro, NJ Tel 732 Fax 732

GTP-760 specifications

The Adcom GTP-760 is a high-performance audio/video surround processor that combines advanced technology with ease of use, delivering an exceptional home theater experience. At the heart of the GTP-760 is its extensive support for various audio formats, including Dolby Digital, DTS, and MPEG. This enables the processor to provide an immersive audio experience, allowing users to enjoy their favorite movies, music, and games with remarkable clarity.

One of the standout features of the GTP-760 is its multiple input options. It comes equipped with a range of analog and digital inputs, including HDMI, allowing for seamless integration with a variety of audio and video sources. The HDMI inputs support 4K video pass-through and scaling, making the GTP-760 a future-proof option for home theater setups. Additionally, the inclusion of S-Video, composite, and component video connections ensures compatibility with older devices.

The GTP-760 also offers a comprehensive equalization system, allowing users to tailor their audio output to suit their room’s acoustics and personal preferences. The built-in audio DSP (Digital Signal Processor) delivers advanced sound processing capabilities, enhancing the overall listening experience. With customizable sound modes, users can select settings optimized for music, movies, or gaming, ensuring versatility for different content types.

User friendliness is a focal point of the GTP-760 design. The intuitive front panel controls and the ergonomic remote make navigation a breeze, while the backlit display provides clear visibility, even in low light environments. Additionally, the processor features programmable memory settings, allowing users to save different configurations for quick access.

Beyond audio performance, the GTP-760 offers robust video processing capabilities. It supports various video formats, ensuring high-quality picture output regardless of the source. The unit’s solid build quality and premium components contribute to its reliability and longevity.

In conclusion, the Adcom GTP-760 is a well-rounded surround processor that delivers outstanding sound quality and video processing capabilities. Its variety of input options, advanced audio technologies, and user-friendly design make it an excellent choice for both amateur and avid home theater enthusiasts. With its ability to enhance audio-visual experiences, the GTP-760 stands out as a remarkable addition to any entertainment system.
Top Page Image Contents